SNLS477B October 2014 – November 2018 DS90UB948-Q1
AEQ_TEST is described in Table 58.
Return to Summary Table.
AEQ Test register: If PORT1_SEL is set, this register sets port1 AEQ controls.
|6||AEQ_RESTART||R/W||0x0||Set high to restart AEQ adaptation from initial value. Method is write HIGH then write LOW - not self clearing. Adaption will be restarted on both ports.|
|5||OVERRIDE_AEQ_FLOOR||R/W||0x0||Enable operation of SET_AEQ_FLOOR|
|4||SET_AEQ_FLOOR||R/W||0x0||AEQ adaptation starts from a pre-set floor value rather than from zero - good in long cable situations|