SNOSD01D May 2015 – October 2016 LDC1101
A parallel set of 1-µF and 0.1-µF capacitors must be used to bypass VDD, although it may be necessary to include a larger capacitor with systems which have a larger amount of supply variation. The smallest value capacitor should be placed as close to the VDD pin as possible. A ground plane is recommended to connect both the ground and the die attach pad (DAP).
CLDO capacitor must be nonpolarized and have an equivalent series resistance (ESR) less than 1 Ω, with a SRF of at least 24 MHz.