SPRS797C November   2012  – October 2018 TMS320F28050 , TMS320F28051 , TMS320F28052 , TMS320F28053 , TMS320F28054 , TMS320F28055

PRODUCTION DATA.  

  1. 1Device Overview
    1. 1.1 Features
    2. 1.2 Applications
    3. 1.3 Description
    4. 1.4 Functional Block Diagram
  2. 2Revision History
  3. 3Device Comparison
    1. 3.1 Related Products
  4. 4Terminal Configuration and Functions
    1. 4.1 Pin Diagram
    2. 4.2 Signal Descriptions
      1. Table 4-1 Signal Descriptions
  5. 5Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Power Consumption Summary
      1. Table 5-1 TMS320F2805x Current Consumption at 60-MHz SYSCLKOUT
      2. 5.4.1     Reducing Current Consumption
      3. 5.4.2     Current Consumption Graphs (VREG Enabled)
    5. 5.5  Electrical Characteristics
    6. 5.6  Thermal Resistance Characteristics for PN Package
    7. 5.7  Thermal Design Considerations
    8. 5.8  Emulator Connection Without Signal Buffering for the MCU
    9. 5.9  Parameter Information
      1. 5.9.1 Timing Parameter Symbology
      2. 5.9.2 General Notes on Timing Parameters
    10. 5.10 Test Load Circuit
    11. 5.11 Power Sequencing
      1. Table 5-3 Reset (XRS) Timing Requirements
      2. Table 5-4 Reset (XRS) Switching Characteristics
    12. 5.12 Clock Specifications
      1. 5.12.1 Device Clock Table
        1. Table 5-5 2805x Clock Table and Nomenclature (60-MHz Devices)
        2. Table 5-6 Device Clocking Requirements/Characteristics
        3. Table 5-7 Internal Zero-Pin Oscillator (INTOSC1, INTOSC2) Characteristics
      2. 5.12.2 Clock Requirements and Characteristics
        1. Table 5-8  XCLKIN Timing Requirements - PLL Enabled
        2. Table 5-9  XCLKIN Timing Requirements - PLL Disabled
        3. Table 5-10 XCLKOUT Switching Characteristics (PLL Bypassed or Enabled)
    13. 5.13 Flash Timing
      1. Table 5-11 Flash/OTP Endurance for T Temperature Material
      2. Table 5-12 Flash/OTP Endurance for S Temperature Material
      3. Table 5-13 Flash/OTP Endurance for Q Temperature Material
      4. Table 5-14 Flash Parameters at 60-MHz SYSCLKOUT
      5. Table 5-15 Flash/OTP Access Timing
      6. Table 5-16 Flash Data Retention Duration
  6. 6Detailed Description
    1. 6.1 Overview
      1. 6.1.1  CPU
      2. 6.1.2  Control Law Accelerator
      3. 6.1.3  Memory Bus (Harvard Bus Architecture)
      4. 6.1.4  Peripheral Bus
      5. 6.1.5  Real-Time JTAG and Analysis
      6. 6.1.6  Flash
      7. 6.1.7  M0, M1 SARAMs
      8. 6.1.8  L0 SARAM, and L1, L2, and L3 DPSARAMs
      9. 6.1.9  Boot ROM
        1. 6.1.9.1 Emulation Boot
        2. 6.1.9.2 GetMode
        3. 6.1.9.3 Peripheral Pins Used by the Bootloader
      10. 6.1.10 Security
      11. 6.1.11 Peripheral Interrupt Expansion Block
      12. 6.1.12 External Interrupts (XINT1 to XINT3)
      13. 6.1.13 Internal Zero-Pin Oscillators, Oscillator, and PLL
      14. 6.1.14 Watchdog
      15. 6.1.15 Peripheral Clocking
      16. 6.1.16 Low-power Modes
      17. 6.1.17 Peripheral Frames 0, 1, 2, 3 (PFn)
      18. 6.1.18 General-Purpose Input/Output Multiplexer
      19. 6.1.19 32-Bit CPU-Timers (0, 1, 2)
      20. 6.1.20 Control Peripherals
      21. 6.1.21 Serial Port Peripherals
    2. 6.2 Memory Maps
    3. 6.3 Register Map
    4. 6.4 Device Emulation Registers
    5. 6.5 VREG, BOR, POR
      1. 6.5.1 On-chip VREG
        1. 6.5.1.1 Using the On-chip VREG
        2. 6.5.1.2 Disabling the On-chip VREG
      2. 6.5.2 On-chip Power-On Reset and Brownout Reset Circuit
    6. 6.6 System Control
      1. 6.6.1 Internal Zero-Pin Oscillators
      2. 6.6.2 Crystal Oscillator Option
      3. 6.6.3 PLL-Based Clock Module
      4. 6.6.4 Loss of Input Clock (NMI-watchdog Function)
      5. 6.6.5 CPU-watchdog Module
    7. 6.7 Low-power Modes Block
    8. 6.8 Interrupts
      1. 6.8.1 External Interrupts
        1. 6.8.1.1 External Interrupt Electrical Data/Timing
          1. Table 6-26 External Interrupt Timing Requirements
          2. Table 6-27 External Interrupt Switching Characteristics
    9. 6.9 Peripherals
      1. 6.9.1  Control Law Accelerator
        1. 6.9.1.1 CLA Device-Specific Information
        2. 6.9.1.2 CLA Register Descriptions
      2. 6.9.2  Analog Block
        1. 6.9.2.1 Analog-to-Digital Converter
          1. 6.9.2.1.1 ADC Device-Specific Information
          2. 6.9.2.1.2 ADC Electrical Data/Timing
            1. Table 6-32  ADC Electrical Characteristics
            2. Table 6-34  ADC Power Modes
            3. 6.9.2.1.2.1 External ADC Start-of-Conversion Electrical Data/Timing
              1. Table 6-35 External ADC Start-of-Conversion Switching Characteristics
            4. 6.9.2.1.2.2 Internal Temperature Sensor
              1. Table 6-36 Temperature Sensor Coefficient
            5. 6.9.2.1.2.3 ADC Power-Up Control Bit Timing
              1. Table 6-37 ADC Power-Up Delays
            6. 6.9.2.1.2.4 ADC Sequential and Simultaneous Timings
        2. 6.9.2.2 Analog Front End
          1. 6.9.2.2.1 AFE Device-Specific Information
          2. 6.9.2.2.2 AFE Register Descriptions
          3. 6.9.2.2.3 PGA Electrical Data/Timing
          4. 6.9.2.2.4 Comparator Block Electrical Data/Timing
            1. Table 6-45 Electrical Characteristics of the Comparator/DAC
          5. 6.9.2.2.5 VREFOUT Buffered DAC Electrical Data
            1. Table 6-46 Electrical Characteristics of VREFOUT Buffered DAC
      3. 6.9.3  Detailed Descriptions
      4. 6.9.4  Serial Peripheral Interface
        1. 6.9.4.1 SPI Device-Specific Information
        2. 6.9.4.2 SPI Register Descriptions
        3. 6.9.4.3 SPI Master Mode Electrical Data/Timing
          1. Table 6-48 SPI Master Mode External Timing (Clock Phase = 0)
          2. Table 6-49 SPI Master Mode External Timing (Clock Phase = 1)
        4. 6.9.4.4 SPI Slave Mode Electrical Data/Timing
          1. Table 6-50 SPI Slave Mode External Timing (Clock Phase = 0)
          2. Table 6-51 SPI Slave Mode External Timing (Clock Phase = 1)
      5. 6.9.5  Serial Communications Interface
        1. 6.9.5.1 SCI Device-Specific Information
        2. 6.9.5.2 SCI Register Descriptions
      6. 6.9.6  Enhanced Controller Area Network
        1. 6.9.6.1 eCAN Device-Specific Information
        2. 6.9.6.2 eCAN Register Descriptions
      7. 6.9.7  Inter-Integrated Circuit
        1. 6.9.7.1 I2C Device-Specific Information
        2. 6.9.7.2 I2C Register Descriptions
        3. 6.9.7.3 I2C Electrical Data/Timing
          1. Table 6-58 I2C Timing Requirements
          2. Table 6-59 I2C Switching Characteristics
      8. 6.9.8  Enhanced Pulse Width Modulator
        1. 6.9.8.1 ePWM Device-Specific Information
        2. 6.9.8.2 ePWM Register Descriptions
        3. 6.9.8.3 ePWM Electrical Data/Timing
          1. Table 6-62 ePWM Timing Requirements
          2. Table 6-63 ePWM Switching Characteristics
          3. 6.9.8.3.1  Trip-Zone Input Timing
            1. Table 6-64 Trip-Zone Input Timing Requirements
      9. 6.9.9  Enhanced Capture Module
        1. 6.9.9.1 eCAP Module Device-Specific Information
        2. 6.9.9.2 eCAP Module Register Descriptions
        3. 6.9.9.3 eCAP Module Electrical Data/Timing
          1. Table 6-66 eCAP Timing Requirement
          2. Table 6-67 eCAP Switching Characteristics
      10. 6.9.10 Enhanced Quadrature Encoder Pulse
        1. 6.9.10.1 eQEP Device-Specific Information
        2. 6.9.10.2 eQEP Register Descriptions
        3. 6.9.10.3 eQEP Electrical Data/Timing
          1. Table 6-69 eQEP Timing Requirements
          2. Table 6-70 eQEP Switching Characteristics
      11. 6.9.11 JTAG Port
        1. 6.9.11.1 JTAG Port Device-Specific Information
      12. 6.9.12 General-Purpose Input/Output
        1. 6.9.12.1 GPIO Device-Specific Information
        2. 6.9.12.2 GPIO Register Descriptions
        3. 6.9.12.3 GPIO Electrical Data/Timing
          1. 6.9.12.3.1 GPIO - Output Timing
            1. Table 6-74 General-Purpose Output Switching Characteristics
          2. 6.9.12.3.2 GPIO - Input Timing
            1. Table 6-75 General-Purpose Input Timing Requirements
          3. 6.9.12.3.3 Sampling Window Width for Input Signals
          4. 6.9.12.3.4 Low-Power Mode Wakeup Timing
            1. Table 6-76 IDLE Mode Timing Requirements
            2. Table 6-77 IDLE Mode Switching Characteristics
            3. Table 6-78 STANDBY Mode Timing Requirements
            4. Table 6-79 STANDBY Mode Switching Characteristics
            5. Table 6-80 HALT Mode Timing Requirements
            6. Table 6-81 HALT Mode Switching Characteristics
  7. 7Applications, Implementation, and Layout
    1. 7.1 TI Design or Reference Design
  8. 8Device and Documentation Support
    1. 8.1 Getting Started
    2. 8.2 Device and Development Support Tool Nomenclature
    3. 8.3 Tools and Software
    4. 8.4 Documentation Support
    5. 8.5 Related Links
    6. 8.6 Community Resources
    7. 8.7 Trademarks
    8. 8.8 Electrostatic Discharge Caution
    9. 8.9 Glossary
  9. 9Mechanical Packaging and Orderable Information
    1. 9.1 Packaging Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

ADC Device-Specific Information

The core of the ADC contains a single 12-bit converter fed by two sample-and-hold circuits. The sample-and-hold circuits can be sampled simultaneously or sequentially. These, in turn, are fed by a total of up to 16 analog input channels. The converter can be configured to run with an internal bandgap reference to create true-voltage-based conversions or with a pair of external voltage references (VREFHI/VREFLO) to create ratiometric-based conversions.

Contrary to previous ADC types, this ADC is not sequencer-based. The user can easily create a series of conversions from a single trigger. However, the basic principle of operation is centered around the configurations of individual conversions, called SOCs, or Start-Of-Conversions.

Functions of the ADC module include:

  • 12-bit ADC core with built-in dual sample-and-hold (S/H)
  • Simultaneous sampling or sequential sampling modes
  • Full range analog input: 0 V to 3.3 V fixed, or VREFHI/VREFLO ratiometric. The digital value of the input analog voltage is derived by:
    • Internal Reference (VREFLO = VSSA. VREFHI must not exceed VDDA when using either internal or external reference modes.)
    • TMS320F28055 TMS320F28054 TMS320F28053 TMS320F28052 TMS320F28051 TMS320F28050 q_adcint_prs523.gif
    • External Reference (VREFHI/VREFLO connected to external references. VREFHI must not exceed VDDA when using either internal or external reference modes.)
    • TMS320F28055 TMS320F28054 TMS320F28053 TMS320F28052 TMS320F28051 TMS320F28050 q_adcext_prs523.gif
  • Up to 16-channel, multiplexed inputs
  • 16 SOCs, configurable for trigger, sample window, and channel
  • 16 result registers (individually addressable) to store conversion values
  • Multiple trigger sources
    • S/W – software immediate start
    • ePWM 1–7
    • GPIO XINT2
    • CPU-Timer 0, CPU-Timer 1, CPU-Timer 2
    • ADCINT1, ADCINT2
  • 9 flexible PIE interrupts, can configure interrupt request after any conversion

Table 6-30 ADC Configuration and Control Registers

REGISTER NAME ADDRESS SIZE
(×16)
EALLOW
PROTECTED
DESCRIPTION
ADCCTL1 0x7100 1 Yes Control 1 register
ADCCTL2 0x7101 1 Yes Control 2 register
ADCINTFLG 0x7104 1 No Interrupt Flag register
ADCINTFLGCLR 0x7105 1 No Interrupt Flag Clear register
ADCINTOVF 0x7106 1 No Interrupt Overflow register
ADCINTOVFCLR 0x7107 1 No Interrupt Overflow Clear register
INTSEL1N2 0x7108 1 Yes Interrupt 1 and 2 Selection register
INTSEL3N4 0x7109 1 Yes Interrupt 3 and 4 Selection register
INTSEL5N6 0x710A 1 Yes Interrupt 5 and 6 Selection register
INTSEL7N8 0x710B 1 Yes Interrupt 7 and 8 Selection register
INTSEL9N10 0x710C 1 Yes Interrupt 9 Selection register (reserved Interrupt 10 Selection)
SOCPRICTL 0x7110 1 Yes SOC Priority Control register
ADCSAMPLEMODE 0x7112 1 Yes Sampling Mode register
ADCINTSOCSEL1 0x7114 1 Yes Interrupt SOC Selection 1 register (for 8 channels)
ADCINTSOCSEL2 0x7115 1 Yes Interrupt SOC Selection 2 register (for 8 channels)
ADCSOCFLG1 0x7118 1 No SOC Flag 1 register (for 16 channels)
ADCSOCFRC1 0x711A 1 No SOC Force 1 register (for 16 channels)
ADCSOCOVF1 0x711C 1 No SOC Overflow 1 register (for 16 channels)
ADCSOCOVFCLR1 0x711E 1 No SOC Overflow Clear 1 register (for 16 channels)
ADCSOC0CTL to ADCSOC15CTL 0x7120 to 0x712F 1 Yes SOC0 Control Register to SOC15 Control register
ADCREFTRIM 0x7140 1 Yes Reference Trim register
ADCOFFTRIM 0x7141 1 Yes Offset Trim register
ADCREV 0x714F 1 No Revision register

Table 6-31 ADC Result Registers (Mapped to PF0)

REGISTER NAME ADDRESS SIZE
(×16)
EALLOW
PROTECTED
DESCRIPTION
ADCRESULT0 to ADCRESULT15 0xB00 to 0xB0F 1 No ADC Result 0 register to ADC Result 15 register
TMS320F28055 TMS320F28054 TMS320F28053 TMS320F28052 TMS320F28051 TMS320F28050 adc_conn_prs797.gifFigure 6-16 ADC Connections

ADC Connections if the ADC is Not Used

TI recommends keeping the connections for the analog power pins, even if the ADC is not used. Following is a summary of how the ADC pins should be connected, if the ADC is not used in an application:

  • VDDA – Connect to VDDIO
  • VSSA – Connect to VSS
  • VREFLO – Connect to VSS
  • ADCINAn, ADCINBn, VREFHI – Connect to VSSA

When the ADC module is used in an application, unused ADC input pins should be connected to analog ground (VSSA).

When the ADC is not used, be sure that the clock to the ADC module is not turned on to realize power savings.