SCDS174D August   2004  – November 2015 TS5A3159

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics for 5-V Supply
    6. 6.6  Electrical Characteristics for 3.3-V Supply
    7. 6.7  Electrical Characteristics for 2.5-V Supply
    8. 6.8  Electrical Characteristics for 1.8-V Supply
    9. 6.9  Switching Characteristics for 5-V Supply
    10. 6.10 Switching Characteristics for 3.3-V Supply
    11. 6.11 Switching Characteristics for 2.5-V Supply
    12. 6.12 Switching Characteristics for 1.8-V Supply
    13. 6.13 Typical Characteristics
  7. 7 Parameter Measurement Information
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
    4. 8.4 Device Functional Modes
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curve
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Device Support
      1. 12.1.1 Device Nomenclature
    2. 12.2 Documentation Support
      1. 12.2.1 Related Documentation
    3. 12.3 Community Resources
    4. 12.4 Trademarks
    5. 12.5 Electrostatic Discharge Caution
    6. 12.6 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1)
MIN MAX UNIT
V+ Supply voltage(2) –0.5 6.5 V
VNO
VCOM 		Analog voltage(2)(3)(4) –0.5 V+ + 0.5 V
II/OK Analog port diode current VNO, VCOM < 0 or VNO, VCOM > V+ ±50 mA
INO
ICOM 		ON-state switch current VNO, VCOM = 0 to V+ ±200 mA
ON-state peak switch current(5) ±400 mA
VIN Digital input voltage(2)(3) –0.5 6.5 V
IIK Digital input clamp current VIN < 0 –50 mA
Continuous current through V+ or GND ±100 mA
Tj Junction temperature 150 °C
Tstg Storage temperature –65 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to ground, unless otherwise specified.
(3) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(4) This value is limited to 5.5 V maximum.
(5) Pulse at 1-ms duration < 10% duty cycle.

6.2 ESD Ratings

VALUE UNIT
V(ESD) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±2000 V
Charged-device model (CDM), per JEDEC specification JESD22-C101(2) ±1000
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
VI/O Switch input/output voltage 0 V+ V
V+ Supply voltage 1.65 5.5 V
VI Control input voltage 0 5.5 V
TA Operating temperature –40 85 °C

6.4 Thermal Information

THERMAL METRIC(1) TS5A3159 UNIT
DBV (SOT-23) DCK (SC-70)
6 PINS 6 PINS
RθJA Junction-to-ambient thermal resistance 165 165 °C/W
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.

6.5 Electrical Characteristics for 5-V Supply

V+ = 4.5 V to 5.5 V and TA = –40°C to 85°C (unless otherwise noted)
PARAMETER TEST CONDITIONS TA V+ MIN TYP(1) MAX UNIT
Analog Switch
VCOM,
VNO, VNC 		Analog signal range 0 V+ V
rpeak Peak ON-state resistance 0 ≤ VNO or VNC ≤ V+,
ICOM = –30 mA, 		Switch ON,
see Figure 10		 25°C 4.5 V 1 1.5 Ω
Full 1.5
ron ON-state resistance VNO or VNC = 2.5 V,
ICOM = –30 mA, 		Switch ON,
see Figure 10		 25°C 4.5 V 0.75 1.1 Ω
Full 1.1
Δron ON-state resistance
match between
channels		 VNO or VNC = 2.5 V,
ICOM = –30 mA, 		Switch ON,
see Figure 10		 25°C 4.5 V 0.1 Ω
ron(flat) ON-state resistance
flatness		 0 ≤ VNO or VNC ≤ V+,
ICOM = –30 mA		 Switch ON,
see Figure 10		 25°C 4.5 V 0.233 Ω
VNO or VNC = 1 V, 1.5 V, 2.5 V,
ICOM = –30 mA		 25°C 0.15
INC(OFF),
INO(OFF) 		NC, NO
Off leakage current		 VNC or VNO = 4.5 V,
VCOM = 0 V,
Switch OFF,
see Figure 11		 25°C 5.5 V –2 0.2 2 nA
Full –20 20
INC(ON),
INO(ON) 		NC, NO
On leakage current		 VNC or VNO = 4.5 V,
VCOM = Open, 		Switch ON,
see Figure 12		 25°C 5.5 V –4 2.8 4 nA
Full –40 40
ICOM(ON) COM
On leakage current		 VNC or VNO = 4.5 V or Open,
VCOM = 4.5 V, 		Switch ON,
see Figure 12		 25°C 5.5 V –4 0.47 4 nA
Full –40 40
Digital Input (IN)
VIH Input logic high Full 2.4 5.5 V
VIL Input logic low Full 0 0.8 V
IIH, IIL Input leakage current VIN = 5.5 V or 0 Full 5.5 V –1 1 μA
Dynamic
tON Turnon time VCOM = V+,
RL = 50 Ω, 		CL = 35 pF,
see Figure 14		 25°C 4.5 V
to
5.5 V		 20 35 ns
Full 40
tOFF Turnoff time VCOM = V+,
RL = 50 Ω, 		CL = 35 pF,
see Figure 14		 25°C 4.5 V
to
5.5 V		 15 20 ns
Full 35
tBBM Break-before-make
time		 VNC = VNO = V+ / 2,
RL = 50 Ω,		 CL = 35 pF,
see Figure 15		 25°C 4.5 V
to
5.5 V		 1 12 14.5 ns
Full 1
QC Charge injection CL = 1 nF,
VGEN = 0 V, 		See Figure 19 25°C 5 V 36 pC
CNC(OFF),
CNO(OFF) 		NC, NO
OFF capacitance		 VNC or VNO = V+ or GND, Switch OFF,
see Figure 13		 25°C 5 V 23 pF
CNC(ON),
CNO(ON) 		NC, NO
ON capacitance		 VNC or VNO = V+ or GND, Switch ON,
see Figure 13		 25°C 5 V 84 pF
CCOM(ON) COM
ON capacitance		 VCOM = V+ or GND, Switch ON,
see Figure 13		 25°C 5 V 84 pF
CIN Digital input
capacitance		 VIN = V+ or GND, See Figure 13 25°C 5 V 2.1 pF
BW Bandwidth RL = 50 Ω, Switch ON,
see Figure 16		 25°C 5 V 100 MHz
OISO OFF isolation RL = 50 Ω,
f = 1 MHz, 		Switch OFF,
see Figure 17		 25°C 5 V –65 dB
XTALK Crosstalk RL = 50 Ω,
f = 1 MHz,		 Switch ON,
see Figure 18		 25°C 5 V –65 dB
THD Total harmonic
distortion		 RL = 600 Ω,
CL = 50 pF, 		f = 600 Hz to
20 kHz,
see Figure 20		 25°C 5 V 0.01%
Supply
I+ Positive supply current VIN = V+ or GND, Switch ON or OFF Full 5.5 V 0.1 μA
(1) TA = 25°C.

6.6 Electrical Characteristics for 3.3-V Supply

V+ = 3 V to 3.6 V and TA = –40°C to 85°C (unless otherwise noted)
PARAMETER TEST CONDITIONS TA V+ MIN TYP(1) MAX UNIT
Analog Switch
VCOM,
VNO, VNC 		Analog signal range 0 V+ V
rpeak Peak ON-state resistance 0 ≤ VNO or VNC ≤ V+,
ICOM = –24 mA, 		Switch ON,
see Figure 10 		25°C 3 V 1.35 2.1 Ω
Full 2.1
ron ON-state resistance VNO or VNC = 2 V,
ICOM = –24 mA, 		Switch ON,
see Figure 10 		25°C 3 V 1.15 1.5 Ω
Full 1.5
Δron ON-state resistance match
between channels		 VNO or VNC = 2 V, 0.8 V,
ICOM = –24 mA, 		Switch ON,
see Figure 10 		25°C 3 V 0.11 Ω
ron(flat) ON-state resistance
flatness		 0 ≤ VNO or VNC ≤ V+,
ICOM = –24 mA, 		Switch ON,
see Figure 10 		25°C 3 V 0.225 Ω
VNO or VNC = 2 V, 0.8 V,
ICOM = –24 mA,		 25°C 0.25
INC(OFF),
INO(OFF) 		NC, NO
Off leakage current		 VNC or VNO = 3 V,
VCOM = 0, 		Switch OFF,
see Figure 11 		25°C 3.6 V 0.2 nA
INC(ON),
INO(ON) 		NC, NO
On leakage current		 VNC or VNO = 3 V,
VCOM = Open, 		Switch ON,
see Figure 12 		25°C 3.6 V 2.8 nA
ICOM(ON) COM
On leakage current		 VNC or VNO = 3 V or Open,
VCOM = 3 V, 		Switch ON,
see Figure 12 		25°C 3.6 V 0.47 nA
Digital Inputs (IN)
VIH Input logic high Full 2 5.5 V
VIL Input logic low Full 0 0.6 V
IIH, IIL Input leakage current VIN = 5.5 V or 0 Full 3.6 V –1 1 µA
Dynamic
tON Turnon time VCOM = V+,
RL = 50 Ω,		 CL = 35 pF,
see Figure 14 		25°C 3 V
to
3.6 V		 30 40 ns
Full 55
tOFF Turnoff time VCOM = V+,
RL = 50 Ω, 		CL = 35 pF,
see Figure 14 		25°C 3 V
to
3.6 V		 20 25 ns
Full 40
tBBM Break-before-make time VNC = VNO = V+ / 2,
RL = 50 Ω,		 CL = 35 pF,
see Figure 15 		25°C 3 V
to
3.6 V		 1 21 29 ns
Full 1
QC Charge injection CL = 1 nF,
VGEN = 0 V, 		see Figure 19 25°C 3.3 V 20 pC
CNC(OFF),
CNO(OFF) 		NC, NO
OFF capacitance		 VNC or VNO = V+ or GND, Switch OFF,
see Figure 13		 25°C 3.3 V 23 pF
CNC(ON),
CNO(ON) 		NC, NO
ON capacitance		 VNC or VNO = V+ or GND, Switch ON,
see Figure 13		 25°C 3.3 V 84 pF
CCOM(ON) COM
ON capacitance		 VCOM = V+ or GND, Switch ON,
see Figure 13		 25°C 3.3 V 84 pF
CIN Digital input capacitance VIN = V+ or GND, See Figure 13 25°C 3.3 V 2.1 pF
BW Bandwidth RL = 50 Ω, Switch ON,
see Figure 16 		25°C 3.3 V 100 MHz
OISO OFF isolation RL = 50 Ω,
f = 1 MHz, 		Switch OFF,
see Figure 17 		25°C 3.3 V –65 dB
XTALK Crosstalk RL = 50 Ω,
f = 1 MHz,		 Switch ON,
see Figure 18 		25°C 3.3 V –65 dB
THD Total harmonic distortion RL = 600 Ω,
CL = 50 pF, 		f = 600 Hz to 20 kHz,
see Figure 20 		25°C 3.3 V 0.015%
Supply
I+ Positive supply current VIN = V+ or GND, Switch ON or OFF Full 3.6 V 0.1 μA

6.7 Electrical Characteristics for 2.5-V Supply

V+ = 2.3 V to 2.7 V and TA = –40°C to 85°C (unless otherwise noted)
PARAMETER TEST CONDITIONS TA V+ MIN TYP(1) MAX UNIT
Analog Switch
VCOM,
VNO, VNC 		Analog signal range 0 V+ V
rpeak Peak ON-state resistance 0 ≤ VNO or VNC ≤ V+,
ICOM = –8 mA,		 Switch ON,
see Figure 10 		25°C 2.5 V 1.7 2.7 Ω
Full 2.7
ron ON-state resistance VNO or VNC = 1.8 V,
ICOM = –8 mA, 		Switch ON,
see Figure 10 		25°C 2.5 V 1.45 2 Ω
Full 2
Δron ON-state resistance match
between channels		 VNO or VNC = 0.8 V, 1.8 V,
ICOM = –8 mA, 		Switch ON,
see Figure 10 		25°C 2.5 V 0.7 Ω
ron(flat) ON-state resistance
flatness		 0 ≤ VNO or VNC ≤ V+,
ICOM = –8 mA, 		Switch ON,
see Figure 10 		25°C 2.5 V 0.5 Ω
VNO or VNC = 0.8 V, 1.8 V
ICOM = –8 mA, 		25°C 0.45
INC(OFF),
INO(OFF) 		NC, NO
Off leakage current		 VNC or VNO = 2.3 V,
VCOM = 0, 		Switch OFF,
see Figure 11 		25°C 2.7 V 0.2 nA
INC(ON),
INO(ON) 		NC, NO
On leakage current		 VNC or VNO = 2.3 V,
VCOM = Open, 		Switch ON,
see Figure 12 		25°C 2.7 V 2.8 nA
ICOM(ON) COM
On leakage current		 VNC or VNO = 2.3 V or Open,
VCOM = 2.3 V, 		Switch ON,
see Figure 12 		25°C 2.7 V 0.47 nA
Digital Input (IN)
VIH Input logic high Full 1.8 5.5 V
VIL Input logic low Full 0 0.6 V
IIH, IIL Input leakage current VIN = 5.5 V or 0 Full 2.7 V –1 1 μA
Dynamic
tON Turnon time VCOM = V+, RL = 50 Ω, CL = 35 pF,
see Figure 14 		25°C 2.3 V
to
2.7 V		 40 55 ns
Full 70
tOFF Turnoff time VCOM = V+, RL = 50 Ω, CL = 35 pF,
see Figure 14 		25°C 2.3 V
to
2.7 V		 30 40 ns
Full 55
tBBM Break-before-make time VNC = VNO = V+ / 2,
RL = 50 Ω,		 CL = 35 pF,
see Figure 15 		25°C 2.3 V
to
2.7 V		 1 33 39 ns
Full 1
QC Charge injection CL = 1 nF, VGEN = 0 V, See Figure 19 25°C 2.5 V 13 pC
CNC(OFF),
CNO(OFF) 		NC, NO
OFF capacitance		 VNC or VNO = V+ or GND, Switch OFF,
see Figure 13 		25°C 2.5 V 23 pF
CNC(ON),
CNO(ON) 		NC, NO
ON capacitance		 VNC or VNO = V+ or GND, Switch ON,
see Figure 13 		25°C 2.5 V 84 pF
CCOM(ON) COM
ON capacitance		 VCOM = V+ or GND, Switch ON,
see Figure 13 		25°C 2.5 V 84 pF
CIN Digital input capacitance VIN = V+ or GND, See Figure 13 25°C 2.5 V 2.1 pF
BW Bandwidth RL = 50 Ω, Switch ON,
see Figure 16 		25°C 2.5 V 100 MHz
OISO OFF isolation RL = 50 Ω,
f = 1 MHz, 		Switch OFF,
see Figure 17 		25°C 2.5 V –64 dB
XTALK Crosstalk RL = 50 Ω,
f = 1 MHz,		 Switch ON,
see Figure 18 		25°C 2.5 V –64 dB
THD Total harmonic distortion RL = 600 Ω,
f = 600 Hz to 20 kHz, 		CL = 50 pF,
see Figure 20 		25°C 2.5 V 0.025%
Supply
I+ Positive supply current VIN = V+ or GND, Switch ON or OFF Full 2.7 V 0.1 µA

6.8 Electrical Characteristics for 1.8-V Supply

V+ = 1.65 V to 1.95 V and TA = –40°C to 85°C (unless otherwise noted)
PARAMETER TEST CONDITIONS TA V+ MIN TYP(1) MAX UNIT
Analog Switch
VCOM,
VNO, VNC 		Analog signal 0 V+ V
rpeak Peak ON-resistance 0 ≤ VNO or VNC ≤ V+,
ICOM = –2 mA, 		Switch ON,
see Figure 10 		25°C 1.8 V 4 4.9 Ω
Full 4.9
ron ON-state resistance VNO or VNC = 1.5 V,
ICOM = –2 mA, 		Switch ON,
see Figure 10 		25°C 1.8 V 1.7 3.2 Ω
Full 3.2
Δron ON-state
resistance match
between channels		 VNO or VNC = 0.6 V, 1.5 V,
ICOM = –2 mA, 		Switch ON,
see Figure 10 		25°C 1.8 V 0.7 Ω
Full 0.7
ron(flat) ON-state
resistance flatness		 0 ≤ VNO or VNC ≤ V+,
ICOM = –2 mA, 		Switch ON,
see Figure 10 		25°C 1.8 V 1.85 Ω
Full 1.85
VNO or VNC = 0.6 V, 1.5 V,
ICOM = –2 mA, 		25°C 0.9
Full 0.9
INC(OFF),
INO(OFF) 		NC, NO
OFF leakage current		 VNC or VNO = 1.65 V,
VCOM = 0, 		Switch OFF,
see Figure 11 		25°C 1.95 V 0.2 nA
INC(ON),
INO(ON) 		NC, NO
ON leakage current		 VNC or VNO = 1.65 V,
VCOM = Open, 		Switch ON,
see Figure 12 		25°C 1.95 V 2.8 nA
ICOM(ON) COM
ON leakage current		 VNC or VNO = 1.65 V or open,
VCOM = 1.65 V, 		Switch ON,
see Figure 12 		25°C 1.95 V 0.47 nA
Digital Input (IN)
VIH Input logic high Full 1.5 5.5 V
VIL Input logic low Full 0 0.6 V
IIH, IIL Input leakage current VIN = 5.5 V or 0 Full 1.95 V –1 1 μA
Dynamic
tON Turnon time VCOM = V+,
RL = 50 Ω,		 CL = 35 pF,
see Figure 14 		25°C 1.65 V
to
1.95 V		 65 70 ns
Full 95
tOFF Turnoff time VCOM = V+,
RL = 50 Ω, 		CL = 35 pF,
see Figure 14 		25°C 1.65 V
to
1.95 V		 40 55 ns
Full 70
tBBM Break-before-make time VNC = VNO = V+ / 2,
RL = 50 Ω,		 CL = 35 pF,
see Figure 15 		25°C 1.65 V
to
1.95 V		 1 60 72 ns
Full 0.5
QC Charge injection CL = 1 nF, VGEN = 0 V, See Figure 19 25°C 1.8 V 13 pC
CNC(OFF),
CNO(OFF) 		NC, NO
OFF capacitance		 VNC or VNO = V+ or GND, Switch OFF,
see Figure 13		 25°C 1.8 V 23 pF
CNC(ON),
CNO(ON) 		NC, NO
ON capacitance		 VNC or VNO = V+ or GND, Switch ON,
see Figure 13		 25°C 1.8 V 84 pF
CCOM(ON) COM
ON capacitance		 VCOM = V+ or GND, Switch ON,
see Figure 13		 25°C 1.8 V 84 pF
CIN Digital input capacitance VIN = V+ or GND, See Figure 13 25°C 1.8 V 2.1 pF
BW Bandwidth RL = 50 Ω, Switch ON,
see Figure 16 		25°C 5.5 V 100 MHz
OISO OFF isolation RL = 50 Ω,
f = 1 MHz,		 Switch OFF,
see Figure 17 		25°C 1.8 V –63 dB
XTALK Crosstalk RL = 50 Ω,
f = 1 MHz,		 Switch ON,
see Figure 18 		25°C 1.8 V –63 dB
Supply
I+ Positive supply current VIN = V+ or GND, Switch ON or OFF Full 1.8 V 0.1 µA

6.9 Switching Characteristics for 5-V Supply

over operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS TA V+ MIN TYP MAX UNIT
tON Turnon time VCOM = V+,
RL = 50 Ω,		 CL = 35 pF,
see Figure 14 		25°C 4.5 V to
5.5 V		 20 35 ns
Full 40
tOFF Turnoff time VCOM = V+,
RL = 50 Ω,		 CL = 35 pF,
see Figure 14 		25°C 4.5 V to
5.5 V		 15 20 ns
Full 35
tBBM Break-before-make time VNC = VNO = V+/2,
RL = 50 Ω,		 CL = 35 pF,
see Figure 15 		25°C 4.5 V to
5.5 V		 1 12 14.5 ns
Full 1

6.10 Switching Characteristics for 3.3-V Supply

over operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS TA V+ MIN TYP MAX UNIT
tON Turnon time VCOM = V+,
RL = 50 Ω,		 CL = 35 pF,
see Figure 14 		25°C 3 V to
3.6 V		 30 40 ns
Full 55
tOFF Turnoff time VCOM = V+,
RL = 50 Ω,		 CL = 35 pF,
see Figure 14 		25°C 3 V to
3.6 V		 20 25 ns
Full 40
tBBM Break-before-make time VNC = VNO = V+/2,
RL = 50 Ω,		 CL = 35 pF,
see Figure 15 		25°C 3 V to
3.6 V		 1 21 29 ns
Full 1

6.11 Switching Characteristics for 2.5-V Supply

over operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS TA V+ MIN TYP MAX UNIT
tON Turnon time VCOM = V+,
RL = 50 Ω,		 CL = 35 pF,
see Figure 14 		25°C 2.3 V to
2.7 V		 40 55 ns
Full 70
tOFF Turnoff time VCOM = V+,
RL = 50 Ω,		 CL = 35 pF,
see Figure 14 		25°C 2.3 V to
2.7 V		 30 40 ns
Full 55
tBBM Break-before-make time VNC = VNO = V+/2,
RL = 50 Ω,		 CL = 35 pF,
see Figure 15 		25°C 2.3 V to
2.7 V		 1 33 39 ns
Full 1

6.12 Switching Characteristics for 1.8-V Supply

over operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS TA V+ MIN TYP MAX UNIT
tON Turnon time VCOM = V+,
RL = 50 Ω,		 CL = 35 pF,
see Figure 14 		25°C 1.65 V to
1.95 V		 65 70 ns
Full 95
tOFF Turnoff time VCOM = V+,
RL = 50 Ω,		 CL = 35 pF,
see Figure 14 		25°C 1.65 V to
1.95 V		 40 55 ns
Full 70
tBBM Break-before-make time VNC = VNO = V+/2,
RL = 50 Ω,		 CL = 35 pF,
see Figure 15 		25°C 1.65 V to
1.95 V		 1 60 72 ns
Full 1

6.13 Typical Characteristics

TS5A3159 gr1_cds174.gif
Figure 1. ron vs VCOM
TS5A3159 gr3_cds174.gif
Figure 3. ron vs VCOM
TS5A3159 gr5_cds174.gif
Figure 5. tON/OFF vs V+
TS5A3159 gr8_cds174.gif
Figure 7. Frequency Response
TS5A3159 gr10_cds174.gif
Figure 9. Total Harmonic Distortion (THD) vs Frequency
TS5A3159 gr2_cds174.gif
Figure 2. ron vs VCOM
TS5A3159 gr4_cds174.gif
Figure 4. Leakage Current vs Temperature
TS5A3159 gr7_cds174.gif
Figure 6. Logic Threshold vs Power Supply
TS5A3159 gr9_cds174.gif
Figure 8. Power-Supply Current vs Temperature