15-9 |
RESERVED |
W |
0h |
This bit is reserved
|
8 |
ALM-RESET |
W |
0h |
Set this bit to 1 to clear an alarm event. Not applicable for a DAC-BUSY alarm event.
|
7 |
AB-TOG2 |
W |
0h |
If soft toggle is enabled set, this bit controls the toggle between values for those DACs that have been set in toggle mode 2 in the TOGGCONFIG register. Set to 1 to update to Register B and clear to 0 for Register A.
|
6 |
AB-TOG1 |
W |
0h |
If soft toggle is enabled set, this bit controls the toggle between values for those DACs that have been set in toggle mode 1 in the TOGGCONFIG register. Set to 1 to updated to Register B and clear to 0 for Register A.
|
5 |
AB-TOG0 |
W |
0h |
If soft toggle is enabled set, this bit controls the toggle between values for those DACs that have been set in toggle mode 0 in the TOGGCONFIG register. Set to 1 to update to Register B and clear to 0 for Register A.
|
4 |
LDAC |
W |
0h |
Set this bit to 1 to synchronously load those DACs who have been set in synchronous mode in the SYNCCONFIG register.
|
3-0 |
SOFT-RESET[3:0] |
W |
0h |
When set to the reserved code 1010 resets the device to its default state.
|