Parametrische Suche für Power-Management-Referenzdesigns ist verfügbar beipowerlab™ Suchtool
The bq25892 is a highly-integrated switch-mode battery charge management and system power path management device for single cell Li-Ion and Li-polymer battery in a wide range of smartphone and other portable devices with USB or high voltage adaptors. Its low impedance power path optimizes (...)
This TI Precision Verified Design circuit converts the differential current output of audio DACs to a single-ended voltage capable of driving low impedance headphones. This design is capable of meeting the high-fidelity performance levels currently being popularized in cell phones and portable audio (...)
This TI Precision design details the design process for a preamplifier to be used with electret microphone capsules. It explains the basic construction and operation of an electret microphone and uses an OPA172 to amplify the output of the microphone to common analog line level voltages.
This reference design details a high-fidelity headphone amplifier circuit suitable for portable applications, such as smartphones and tablets. It uses an operational amplifier (op amp) with low power consumption and a very small package to convert a differential output voltage to a single-ended (...)
The PMP40228 is a reference design for 5V 2A adapter applications. The solution implements a high efficiency primary side controller UCC28704, it meets COC V5 Tier2 2016 specification with 130mOhm cable, it is fully test and passes conduction EMI. The board uses a single layer PCB and diode (...)
The TIDA-03027 reference design represents a multiport adapter solution that enables products with a USB Type-C interface to connect to HDMI 2.0 and USB 3.0 Type-A interfaces. It also includes an additional USB Type-C full feature receptacle, which allows the user to simultaneously connect USB (...)
Headphone amplifiers usually require positive and negative voltages. In this reference design, both voltages are generated from a single input voltage with an integrated split-rail charge-pump converter. It provides small solution size with five capacitors and four resistors.
The TIDA-03029 reference design is a software implementation that uses an integrated programmable digital to analog driver to interface with an adjustable high voltage dedicated charging port. This solution allows for charging efficiency optimization by modifying the adapter output voltage according (...)
The PMP40133 control board provides the interface with fast charger adapter solution. The main MCU is MSP430G2955 which controls communication with a charger device using MaxCharge™ techonlogy. TPL0102-100 digital potentiometer is used for fine tuning the adapter output voltage. 256 taps  (...)
Smartphones and other handheld equipment with 3AHr+ 1S Li-Ion batteries require 3-A+ charger current for fast charging. Parallel chargers allow for high charge currents, resulting in shorter charge times, while distributing the heat losses across the end equipment PCB, thereby preventing (...)