This dual buffer/driver is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.95-V VCC operation.
The SN74AUC2G240 is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.
This device is organized as two 1-bit buffers/drivers with separate output-enable (OE) inputs. When OE is low, the device passes data from the A input to the Y output. When OE is high, the outputs are in the high-impedance state.
NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
For more information about AUC Little Logic devices, please refer to the TI application report, Applications of Texas Instruments AUC Sub-1-V Little Logic Devices, literature number SCEA027.
NanoFree is a trademark of Texas Instruments.
|Part number||Order||Technology Family||VCC (Min) (V)||VCC (Max) (V)||Bits (#)||Voltage (Nom) (V)||F @ nom voltage (Max) (MHz)||ICC @ nom voltage (Max) (mA)||tpd @ nom Voltage (Max) (ns)||IOL (Max) (mA)||IOH (Max) (mA)||Schmitt trigger||Rating||Operating temperature range (C)|
|9||-9||No||Catalog||-40 to 85|