SLOS870B September 2016  – October 2017 TAS6424-Q1

PRODUCTION DATA. 

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Device Comparison Table
  6. Pin Configuration and Functions
  7. Specifications
    1. 7.1Absolute Maximum Ratings
    2. 7.2ESD Ratings
    3. 7.3Recommended Operating Conditions
    4. 7.4Thermal Information
    5. 7.5Electrical Characteristics
    6. 7.6Timing Requirements
    7. 7.7Typical Characteristics
  8. Parameter measurement Information
  9. Detailed description
    1. 9.1Overview
    2. 9.2Functional Block Diagram
    3. 9.3Feature Description
      1. 9.3.1 Serial Audio Port
        1. 9.3.1.1 I2S Mode
        2. 9.3.1.2Left-Justified Timing
        3. 9.3.1.3Right-Justified Timing
        4. 9.3.1.4TDM Mode
        5. 9.3.1.5Supported Clock Rates
        6. 9.3.1.6Audio-Clock Error Handling
      2. 9.3.2 High-Pass Filter
      3. 9.3.3 Volume Control and Gain
      4. 9.3.4 High-Frequency Pulse-Width Modulator (PWM)
      5. 9.3.5 Gate Drive
      6. 9.3.6 Power FETs
      7. 9.3.7 Load Diagnostics
        1. 9.3.7.1DC Load Diagnostics
        2. 9.3.7.2Line Output Diagnostics
        3. 9.3.7.3AC Load Diagnostics
      8. 9.3.8 Protection and Monitoring
        1. 9.3.8.1Overcurrent Limit (ILIMIT)
        2. 9.3.8.2Overcurrent Shutdown (ISD)
        3. 9.3.8.3DC Detect
        4. 9.3.8.4Clip Detect
        5. 9.3.8.5Global Overtemperature Warning (OTW), Overtemperature Shutdown (OTSD)
        6. 9.3.8.6Channel Overtemperature Warning [OTW(i)] and Shutdown [OTSD(i)]
        7. 9.3.8.7Undervoltage (UV) and Power-On-Reset (POR)
        8. 9.3.8.8Overvoltage (OV) and Load Dump
      9. 9.3.9 Power Supply
        1. 9.3.9.1Vehicle-Battery Power-Supply Sequence
        2. 9.3.9.2Boosted Power-Supply Sequence
      10. 9.3.10Hardware Control Pins
        1. 9.3.10.1FAULT
        2. 9.3.10.2WARN
        3. 9.3.10.3MUTE
        4. 9.3.10.4STANDBY
    4. 9.4Device Functional Modes
      1. 9.4.1Operating Modes and Faults
    5. 9.5Programming
      1. 9.5.1I2C Serial Communication Bus
      2. 9.5.2I2C Bus Protocol
      3. 9.5.3Random Write
      4. 9.5.4Sequential Write
      5. 9.5.5Random Read
      6. 9.5.6Sequential Read
    6. 9.6Register Maps
      1. 9.6.1 Mode Control Register (address = 0x00) [default = 0x00]
      2. 9.6.2 Miscellaneous Control 1 Register (address = 0x01) [default = 0x32]
      3. 9.6.3 Miscellaneous Control 2 Register (address = 0x02) [default = 0x62]
      4. 9.6.4 SAP Control (Serial Audio-Port Control) Register (address = 0x03) [default = 0x04]
      5. 9.6.5 Channel State Control Register (address = 0x04) [default = 0x55]
      6. 9.6.6 Channel 1 Through 4 Volume Control Registers (address = 0x05-0x088) [default = 0xCF]
      7. 9.6.7 DC Load Diagnostic Control 1 Register (address = 0x09) [default = 0x00]
      8. 9.6.8 DC Load Diagnostic Control 2 Register (address = 0x0A) [default = 0x11]
      9. 9.6.9 DC Load Diagnostic Control 3 Register (address = 0x0B) [default = 0x11]
      10. 9.6.10DC Load Diagnostic Report 1 Register (address = 0x0C) [default = 0x00]
      11. 9.6.11DC Load Diagnostic Report 2 Register (address = 0x0D) [default = 0x00]
      12. 9.6.12DC Load Diagnostics Report 3—Line Output—Register (address = 0x0E) [default = 0x00]
      13. 9.6.13Channel State Reporting Register (address = 0x0F) [default = 0x55]
      14. 9.6.14Channel Faults (Overcurrent, DC Detection) Register (address = 0x10) [default = 0x00]
      15. 9.6.15Global Faults 1 Register (address = 0x11) [default = 0x00]
      16. 9.6.16Global Faults 2 Register (address = 0x12) [default = 0x00]
      17. 9.6.17Warnings Register (address = 0x13) [default = 0x20]
      18. 9.6.18Pin Control Register (address = 0x14) [default = 0xFF]
      19. 9.6.19AC Load Diagnostic Control 1 Register (address = 0x15) [default = 0x00]
      20. 9.6.20AC Load Diagnostic Control 2 Register (address = 0x16) [default = 0x00]
      21. 9.6.21AC Load Diagnostic Impedance Report Ch1 through CH4 Registers (address = 0x17-0x1A) [default = 0x00]
      22. 9.6.22AC Load Diagnostic Phase Report High Register (address = 0x1B) [default = 0x00]
      23. 9.6.23AC Load Diagnostic Phase Report Low Register (address = 0x1C) [default = 0x00]
      24. 9.6.24AC Load Diagnostic STI Report High Register (address = 0x1D) [default = 0x00]
      25. 9.6.25AC Load Diagnostic STI Report Low Register (address = 0x1C) [default = 0x00]
      26. 9.6.26Miscellaneous Control 3 Register (address = 0x21) [default = 0x00]
      27. 9.6.27Clip Control Register (address = 0x22) [default = 0x01]
      28. 9.6.28Clip Window Register (address = 0x23) [default = 0x14]
      29. 9.6.29Clip Warning Register (address = 0x24) [default = 0x00]
      30. 9.6.30ILIMIT Status Register (address = 0x25) [default = 0x00]
      31. 9.6.31Miscellaneous Control 4 Register (address = 0x26) [default = 0x40]
  10. 10Application and Implementation
    1. 10.1Application Information
      1. 10.1.1AM-Radio Band Avoidance
      2. 10.1.2Parallel BTL Operation (PBTL)
      3. 10.1.3Demodulation Filter Design
      4. 10.1.4Line Driver Applications
    2. 10.2Typical Applications
      1. 10.2.1BTL Application
        1. 10.2.1.1Design Requirements
        2. 10.2.1.2Power Supplies
        3. 10.2.1.3Communication
        4. 10.2.1.4Detailed Design Procedure
          1. 10.2.1.4.1Hardware Design
          2. 10.2.1.4.2Digital Input and the Serial Audio Port
          3. 10.2.1.4.3Bootstrap Capacitors
          4. 10.2.1.4.4Output Reconstruction Filter
        5. 10.2.1.5Application Curves
      2. 10.2.2PBTL Application
        1. 10.2.2.1Design Requirements
          1. 10.2.2.1.1Detailed Design Procedure
        2. 10.2.2.2Application Curves
  11. 11Power Supply Recommendations
  12. 12Layout
    1. 12.1Layout Guidelines
      1. 12.1.1Electrical Connection of Thermal pad and Heat Sink
      2. 12.1.2EMI Considerations
      3. 12.1.3General Guidelines
    2. 12.2Layout Example
    3. 12.3Thermal Considerations
  13. 13Device and Documentation Support
    1. 13.1Documentation Support
      1. 13.1.1Related Documentation
    2. 13.2Receiving Notification of Documentation Updates
    3. 13.3Community Resources
    4. 13.4Trademarks
    5. 13.5Electrostatic Discharge Caution
    6. 13.6Glossary
  14. 14Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
  • DKQ|56
Orderable Information

IMPORTANT NOTICE

Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.

TI’s published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and services.

Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Buyers and others who are developing systems that incorporate TI products (collectively, “Designers”) understand and agrees that Designers remain responsible for using their independent analysis, evaluation and judgment in designing their systems and products, and have full and exclusive responsibility to assure the safety of their products and compliance of their products (and of all TI products used in or for such Designers’ products) with all applicable regulations, laws and other applicable requirements. Designers represent that, with respect to their applications, they have all the necessary expertise to create and implement safeguards that (1) anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and take appropriate actions. Designers agree that prior to using or distributing any systems that include TI products, they will thoroughly test such systems and the functionality of such TI products as used in such systems.

TI’s provision of reference designs and any other technical, applications or design advice, quality characterization, reliability data or other information or services does not expand or otherwise alter TI’s applicable published warranties or warranty disclaimers for TI products, and no additional obligations or liabilities arise from TI providing such reference designs or other items.

Designers are authorized to use, copy and modify any individual TI reference design only in connection with the development of end products that include the TI product(s) identified in that reference design. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services, or a warranty or endorsement thereof. Use of the reference design or other items described above may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.

TI REFERENCE DESIGNS AND OTHER ITEMS DESCRIBED ABOVE ARE PROVIDED “AS IS” AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING THE REFERENCE DESIGNS OR USE OF THE REFERENCE DESIGNS, INCLUDING BUT NOT LIMITED TO ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.

TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNERS AGAINST ANY CLAIM, INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF PRODUCTS AS DESCRIBED IN A TI REFERENCE DESIGN OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL, DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF THE REFERENCE DESIGNS OR USE OF THE REFERENCE DESIGNS, AND REGARDLESS OF WHETHER TI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949 and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements.

Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use. Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S.

TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product). Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications and that proper product selection is at Designers’ own risk. Designers are solely responsible for compliance with all legal and regulatory requirements in connection with such selection.

Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer’s non-compliance with the terms and provisions of this Notice.

IMPORTANT NOTICE

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2017, Texas Instruments Incorporated