The TLV1548 is a CMOS 10-bit switched-capacitor successive-approximation (SAR) analog-to-digital (A/D) converter. The device has a chip select (CS)\, input-output clock (I/O CLK), data input (DATA IN) and serial data output (DATA OUT) that provides a direct 4-wire synchronous serial peripheral interface (SPI, QSPI) port of a host microprocessor. When interfacing with a TMS320 DSP, an additional frame sync signal (FS) indicates the start of a serial data frame. The device allows high-speed data transfers from the host. The INV CLK\ input provides further timing flexibility for the serial interface.
In addition to a high-speed converter and versatile control capability, the device has an on-chip 11-channel multiplexer that can select any one of eight analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic except for the extended sampling cycle, where the sampling cycle is started by the falling edge of asynchronous CSTART\. At the end of the A/D conversion, the end-of-conversion (EOC) output goes high to indicate that the conversion is complete. The TLV1548 is designed to operate with a wide range of supply voltages with very low power consumption. The power saving feature is further enhanced with a software-programmed power-down mode and conversion rate. The converter incorporated in the device features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range.
The TLV1548 has eight analog input channels. The TLV1548Q is characterized for operation from 40°C to 125°C.
Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
SPI and QSPI are registered trademarks of Motorola, Inc.
|Sample Rate (Max) (kSPS)|
|Number of input channels|
|Operating temperature range (C)|
|Approx. price (US$)|
|Power consumption (Typ) (mW)|
|Package size: mm2:W x L (PKG)|
|Input range (Max) (V)|
|Input range (Min) (V)|
|Analog voltage AVDD (Min) (V)|
|Analog voltage AVDD (Max) (V)|
|Digital supply (Min) (V)|
|Digital supply (Max) (V)|
|INL (Max) (+/-LSB)|
|-40 to 125||-40 to 85||-40 to 125|
|SSOP | 20||SSOP | 20||SSOP | 20|
|3.35 | 1ku||2.64 | 1ku||3.32 | 1ku|
|20SSOP: 38 mm2: 5.3 x 7.2 (SSOP | 20)||20SSOP: 38 mm2: 5.3 x 7.2 (SSOP | 20)||20SSOP: 38 mm2: 5.3 x 7.2 (SSOP | 20)|
|HiRel Enhanced Product||Catalog||Automotive|
|Order now||Order now||Order now|