TPL0102-100 256-Taps Dual-Channel Digital Potentiometer With I2C Interface and Nonvolatile Memory |

TPL0102-100 (ACTIVE)

256-Taps Dual-Channel Digital Potentiometer With I2C Interface and Nonvolatile Memory


Recommended alternative parts

  • TPL0202-10  - The device has SIMILAR FUNCTIONALITY but is not functionally equivalent to the compared device.   This is a similar part with SPI interface and 10k end-to-end resistance


The TPL0102 has two linear-taper digital potentiometers (DPOTs) with 256 wiper positions. Each potentiometer can be used as a three-terminal potentiometer or as a two-terminal rheostat. The TPL0102-100 has an end-to-end resistance of 100 kΩ.

The TPL0102 has non-volatile memory (EEPROM) which can be used to store the wiper position. This is beneficial because the wiper position is stored even during power-off and is automatically reinstated after power-on. The internal registers of the TPL0102 can be accessed using the I2C interface.

The TPL0102 is available in a 14-pin MicroQFN and 14-pin TSSOP package with a specified temperature range of –40°C to 85°C.


  • Two Potentiometers with 256-Position Resolution
  • Non-volatile Memory Stores Wiper Settings
  • 100 kΩ End-to-End Resistance (TPL0102-100)
  • Fast Power-up Response Time to Wiper Setting:
    <100 µs
  • ±0.5 LSB INL, ±0.25 LSB DNL (Voltage-Divider
  • 4 ppm/°C Ratiometric Temperature Coefficient
  • I2C-compatible Serial Interface
  • 2.7 V to 5.5 V Single-Supply Operation
  • ±2.25 V to ±2.75 V Dual-Supply Operation
  • Operating Temperature Range from –40°C to
  • Shutdown Mode
  • ESD Performance Tested Per JESD 22
    • 2000-V Human Body Model (A114-B, Class II)
    • 1000-V Charged-Device Model (C101)
    • Adjustable Gain Amplifiers and Offset Trimming
    • Adjustable Power Supplies
    • Precision Calibration of Set Point Thresholds
    • Sensor Trimming and Calibration
    • Mechanical Potentiometer Replacement

All other trademarks are the property of their respective owners

View more

Parametrics Compare all products in Digital potentiometers (digipots)

Number of steps
Number of channels (#)
Resistance taper
Operating temperature range (C)
Bandwidth (MHz)
Temp Coeff(Typ) (ppm/°C)
TPL0102-100 TPL0202-10 TPL0501-100
256     256     256    
2     2     1    
Linear     Linear     Linear    
Non-Volatile     Non-Volatile     Volatile    
I2C     SPI     SPI    
-40 to 85     -40 to 105     -40 to 125    
0.25     2     0.25    
130     132     35