TPS54060

ACTIVE

This product has been released to the market and is available for purchase. For some products, newer alternatives may be available.

3.5V to 60V Input, 0.5A Step-Down Converter with Eco-Mode

Total Harmonic Distortion Measurement For Energy Monitoring Reference Design

The TIDM-THDREADING reference design implements power quality analysis in a three-phase energy measurement system. Power quality monitoring and analysis has an increasingly large role in improving the reliability of the electricity grid. The design measures Total Harmonic Distortion(THD), monitors (...)

• Schematic/Block Diagram
• Bill of Materials
• Software
• Reference Guide
• Layer Plot
• CAD Files
• Gerber Files

• TI Devices
  TPS54060
  MSP430F67791A

Implementation of a 3-Phase Rogowski Coil Based Watt Hour Meter Reference Design

This design, implements a highly integrated single chip electricity metering solution, with support for Rogowski Coil current sensors. Hardware and software design files are provided to enable calculation of various parameters for multi-phase energy measurement, such as RMS current & voltage (...)

• Schematic/Block Diagram
• Bill of Materials
• Software
• Technical Reference
• Layer Plot
• CAD Files
• Gerber Files

• TI Devices
  MSP430F67791A
  TPS54060

Three-Phase Metrology With Enhanced ESD Protection and Tamper Detection Reference Design

This design implements an ANSI/IEC Class 0.2 three-phase energy meter with enhanced ESD protection. The design also features tamper detection to limit the feasibility of energy theft and communications through ZigBee™ connectivity.  The e-meter SoC is used to perform all metrology (...)

• Schematic/Block Diagram
• Bill of Materials
• Most Recent Bill of Materials
• Three-Phase Metrology with Enhanced ESD Protection and Tamper Detection BOM (Rev. A)
• Additional Bill of Materials
• Three-Phase Metrology with Enhanced ESD Protection and Tamper Detection BOM
• Software
• Reference Guide
• Layer Plot
• Most Recent Layer Plot
• Three-Phase Metrology w/ Enhanced ESD Protection & Tamper Detection Layer Plots (Rev. A)
• Additional Layer Plot
• Three-Phase Metrology w/ Enhanced ESD Protection & Tamper Detection Layer Plots
• CAD Files
• Most Recent CAD Files
• Three-Phase Metrology with Enhanced ESD Protection & Tamper Detection CAD Files (Rev. A)
• Additional CAD Files
• Three-Phase Metrology with Enhanced ESD Protection & Tamper Detection CAD Files
• Gerber Files
• Most Recent Gerber Files
• Three-Phase Metrology with Enhanced ESD Protection and Tamper Detection Gerber (Rev. A)
• Additional Gerber Files
• Three-Phase Metrology with Enhanced ESD Protection and Tamper Detection Gerber

• TI Devices
  MSP430F6779
  MSP430F67791A
  TPS54060
  CC2530
  CC2530-RF4CE
  + More
  MSP430F6779A
  MSP430F67791
  - Less

Magnetic Tamper Detection Using Low-Power Hall Effect Sensors Reference Design

Magnetic tampering can paralyze any transformer in an energy measurement system, which may potentially lead to the system being unable to be powered properly or unable to correctly register the energy consumed by a load.  This design implements a Class 0.2  three-phase energy measurement (...)

• Schematic/Block Diagram
• Bill of Materials
• Software
• Layer Plot
• CAD Files
• Gerber Files

• TI Devices
  DRV5033
  MSP430F67791A
  ISO7320C
  ISO7321C
  TPS709
  + More
  DRV5032
  TRS3232
  UCC28910
  TPS54060
  - Less

Class 0.5 Three-Phase Energy Measurement System with Enhanced ESD Protection Reference Design

The TIDM-3PH-ENERGY5-ESD implements an ANSI/IEC Class 0.5 three-phase energy measurement system with enhanced electrostatic discharge (ESD) protection. The design also features communications through ZigBee™ connectivity.  The energy measurement system on chip (SoC) is used to perform all (...)

• Schematic/Block Diagram
• Bill of Materials
• Software
• Reference Guide
• Layer Plot
• CAD Files
• Gerber Files

• TI Devices
  MSP430F67641A
  CC2530-RF4CE
  TPS54060
  MSP430F67641
  CC2530
  + More
  - Less

Dual Output Inverting Buck-Boost Reference Design Using TPS54060 to Generate +/-31V Output Voltage

The PMP5653 reference design uses the TPS54060 DC/DC converter to generate dual outputs providing +-31V at up to 70mA. The high-side MOSFET is incorporated inside the TPS54060. The negative output is used as the ground reference for the converter, which allows the regulation of the positive and (...)

• Schematic/Block Diagram
• Bill of Materials
• Assembly Drawings

• TI Devices
  TPS54060

24Vdc Input (Double Car Battery) Automotive Multiphase Sync-Buck Reference Design

This high-efficiency, high-power reference design uses the LM5119 two-phase synchronous-buck controller to regulate 14.4V at 60A. This design can be used to supply single car battery power from a double battery system, often found in trucks. Features include input EMI filtering, output hot swap (...)

• Schematic/Block Diagram
• Bill of Materials
• Assembly Drawings
• CAD Files
• Gerber Files

• TI Devices
  INA198
  TPS54060
  LM5119
  LM5060
  LM50
  + More
  - Less