TPS65235-1 LNB voltage regulator with I2C interface in FCCM mode | TI.com

TPS65235-1
This product has been released to the market and is available for purchase. For some products, newer alternatives may be available.
LNB voltage regulator with I2C interface in FCCM mode

 

Description

Designed for analog and digital satellite receivers, the TPS65235-1 is a monolithic voltage regulator with I2C interface; specifically to provide the 13-V to 18-V power supply and the 22-kHz tone signal to the LNB down converter in the antenna dish or to the multi-switch box. The device offers a complete solution with minimum component count, low power dissipation together with simple design and I2C standard interface.

The TPS65235-1 features high power efficiency. The boost converter integrates a 140-mΩ power MOSFET running at 1 MHz or 500 kHz selectable switching frequency. Drop out voltage at the linear regulator is 0.8 V to minimize power loss. The TPS65235-1 provides multiple ways to generate the 22 kHz signal. Integrated linear regulator with push-pull output stage generates 22-kHz tone signal superimposed at the output even at zero loading. Current limit of linear regulator can be programmed by external resistor with ±10% accuracy. Full range of diagnostic read by I2C is available for system monitoring.

The TPS65235-1 has a special design at FCCM mode to avoid the audible noise especially when VIN is higher or closer to the VLNB output.

The TPS65235-1 supports advanced DiSEqC 2.x standard with 22-kHz tone detection circuit and output interface.

Features

  • Complete Integrate Solution for LNB and I2C Interface
  • DiSEqC 2.x, and DiSEqC 1.x Compatible
  • Supports 5-V, 12-V, and 15-V Power Rail
  • Up to 1000-mA Accurate Output Current Limit Adjustable by External Resistor
  • Boost Switch Peak Current Limit Proportional to LDO Current Limit
  • Boost Converter With 140-mΩ Low Rds(on) Internal Power Switch
  • Boost Switching Frequency 1-MHz or 500-kHz Selectable
  • Audible Noise Avoided at Force PWM Mode
  • Dedicated Enable Pin for Non-I2C Application
  • Low-Dropout (LDO) Regulator With Push-Pull Output Stage for VLNB Output
  • Built-In Accurate 22-kHz Tone Generator and External Tone Input Support
  • Supports Both External 44-kHz and 22-kHz Tone Input
  • Adjustable Soft-start and 13-V to 18-V Voltage Transition Time
  • 650-mV to 750-mV 22-kHz Tone Amplitude Selection
  • I2C Registers Accessible with EN Low
  • Short Circuit Dynamic Protection
  • Diagnostics for Output Voltage Level, DiSEqC Tone Input and Output, Current Level, and Cable Connection
  • Thermal Protection Available
  • 20-Pin WQFN 3 mm × 3 mm (RUK) Package

All trademarks are the property of their respective owners.

Parametrics

Compare all products in Boost converters (integrated switch) Email Download to Excel
Part number Order Vin (Min) (V) Vin (Max) (V) Vout (Min) (V) Vout (Max) (V) Switch current limit (Typ) (A) Regulated outputs (#) Switching frequency (Min) (kHz) Switching frequency (Max) (kHz) Iq (Typ) (mA) Features Duty cycle (Max) (%) Operating temperature range (C) Type Rating Package Group
TPS65235-1 Order now 4.5     20     11     20     3     1     500     1000     0.12     Adjustable Current Limit
I2C
Power Good    
78     -40 to 85     Converter     Catalog     WQFN | 20    
TPS65235 Order now 4.5     20     11     20     3     1     500     1000     0.12     Adjustable Current Limit
I2C
Power Good    
78     -40 to 85     Converter     Catalog     WQFN | 20    
TPS652353 Order now 4.5     20     13.25     18.4     3     1           Adjustable Current Limit
I2C
Power Good    
  -40 to 125       Catalog     WQFN | 20