UCC2541 High Efficiency Synchronous Buck PWM Controller | TI.com

UCC2541
This product continues to be in production to support existing customers.
High Efficiency Synchronous Buck PWM Controller

 

This product is not recommended for new designs.

Replaced By UCC2583 – The device has SIMILAR FUNCTIONALITY but is not functionally equivalent to the compared device. Designs can achieve better performance
UCC3583 – The device has SIMILAR FUNCTIONALITY but is not functionally equivalent to the compared device.

TI does not recommend using this part in a new design. This product continues to be in production to support existing customers.

Description

The UCC2541 is a synchronous buck PWM controller for high current and low output voltage applications.

For higher efficiency, it incorporates the Predictive Gate Drive™ technology that virtually eliminates body diode conduction losses in synchronous rectifiers.

The UCC2541 is available in the extended temperature range of -40°C to 105°C and is offered in thermally enhanced PowerPAD™ 20-pin HTSSOP (PWP) or 32-pin quad flatpack (RHB) package. This space saving package with standard 20-pin TSSOP footprint has a drastically lower thermal resistance of 1.4°C/W JC to accommodate the dual high-current drivers on board.

Features

  • On-Chip Predictive Gate Drive™ for High-Efficiency Synchronous Buck Operation
  • Dual ±3-A TrueDrive™ Outputs
  • On-Board Programmable Oscillator with 1-MHz Frequency Operation
  • TR Input for Sequencing Operation
  • Overcurrent Protection using a Parallel Average Current Mode Control Loop
  • 3 Modes to Support 2.7-V to 35-V Input Bias
  • Reverse Current Protection for Output Stage
  • User Programmable Shutdown Using SS Pin
  • ±1.0% Initial Tolerance Bandgap Reference
  • High Bandwidth Error Amplifiers
  • Thermally Enhanced HTSSOP 20-Pin PowerPAD™ Package and QFN-32 Pin
  • Synchronization Input
  • Supports Pre-Bias Applications
  • APPLICATIONS
    • High Efficiency Non-Isolated Converters Requiring Advanced Features such as Pre-Bias Support and Tracking Capability
    • Point-of-Load Modules for Servers, Telecom, and Data communication Equipments
    • Good for Input Voltages of 3.3 V, 5.0 V, 12.0 V, or Intermediate Bus Voltages

Predictive Gate Drive, TrueDrive and PowerPAD are trademarks of Texas Instruments Incorporated.