SLLSER8B June 2017  – August 2017 UCC5310 , UCC5320 , UCC5350 , UCC5390

PRODUCTION DATA. 

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Device Comparison Table
  6. Pin Configuration and Function
  7. Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Power Ratings
    6. 7.6 Insulation Specifications
    7. 7.7 Safety-Related Certifications
    8. 7.8 Safety Limiting Values
    9. 7.9 Electrical Characteristics
    10. 7.10Switching Characteristics
    11. 7.11Insulation Characteristics Curves
    12. 7.12Typical Characteristics
  8. Parameter Measurement Information
    1. 8.1Propagation Delay, Inverting, and Noninverting Configuration
      1. 8.1.1CMTI Testing
  9. Detailed Description
    1. 9.1Overview
    2. 9.2Functional Block Diagram
    3. 9.3Feature Description
      1. 9.3.1Power Supply
      2. 9.3.2Input Stage
      3. 9.3.3Output Stage
      4. 9.3.4Protection Features
        1. 9.3.4.1Undervoltage Lockout (UVLO)
        2. 9.3.4.2Active Pulldown
        3. 9.3.4.3Short-Circuit Clamping
        4. 9.3.4.4Active Miller Clamp (UCC53x0M)
    4. 9.4Device Functional Modes
      1. 9.4.1Device I/O
      2. 9.4.2ESD Structure
  10. 10Application and Implementation
    1. 10.1Application Information
    2. 10.2Typical Application
      1. 10.2.1Design Requirements
      2. 10.2.2Detailed Design Procedure
        1. 10.2.2.1Designing IN+ and IN- Input Filter
        2. 10.2.2.2Gate-Driver Output Resistor
        3. 10.2.2.3Estimate Gate-Driver Power Loss
        4. 10.2.2.4Estimating Junction Temperature
      3. 10.2.3Selecting VCC1 and VCC2 Capacitors
        1. 10.2.3.1Selecting a VCC1 Capacitor
        2. 10.2.3.2Selecting a VCC2 Capacitor
        3. 10.2.3.3Application Circuits With Output Stage Negative Bias
      4. 10.2.4Application Curve
  11. 11Power Supply Recommendations
  12. 12Layout
    1. 12.1Layout Guidelines
    2. 12.2Layout Example
    3. 12.3PCB Material
  13. 13Device and Documentation Support
    1. 13.1Documentation Support
      1. 13.1.1Related Documentation
    2. 13.2Related Links
    3. 13.3Receiving Notification of Documentation Updates
    4. 13.4Community Resources
    5. 13.5Trademarks
    6. 13.6Electrostatic Discharge Caution
    7. 13.7Glossary
  14. 14Mechanical, Packaging, and Orderable Information

Features

  • 3-V to 15-V Input Supply Voltage
  • 13.2-V to 33-V Output Driver Supply Voltage
  • Feature Options
    • Split Outputs (UCC5320S and UCC5390S)
    • UVLO With Respect to IGBT Emitter (UCC5320E and UCC5390E)
    • Miller Clamp Option (UCC5310M and UCC5350M)
  • Negative 5-V Handling Capability on Input Pins
  • 60-ns (Typical) Propagation Delay for UCC5320S, UCC5320E, and UCC5310M
  • 65-ns (Typical) Propagation Delay for UCC5390S, UCC5390E, and UCC5350M
  • 100-kV/μs Minimum Common-Mode Transient Immunity (CMTI)
  • Isolation Surge Withstand Voltage: 4242 VPK
  • Safety-Related Certifications:
    • 4242-VPK Isolation per DIN V VDE V 0884-10 and DIN EN 61010-1 (Planned)
    • 3000-VRMS Isolation for 1 Minute per UL 1577 (Planned)
    • CSA Component Acceptance Notice 5A, IEC 60950-1 and IEC 61010-1 End Equipment Standards (Planned)
    • CQC Certification per GB4943.1-2011 (Planned)
  • 4-kV ESD on All Pins
  • CMOS Inputs
  • 8-pin Narrow Body SOIC Package
  • Operating Temperature: –40°C to +125°C Ambient

Applications

  • Industrial Motor-Control Drives
  • Industrial Power Supplies
  • Solar Inverters
  • HEV and EV Power Modules
  • Induction Heating

Description

The UCC53x0 is a family of compact, single-channel, isolated IGBT, SiC, and MOSFET gate drivers with superior isolation ratings and variants for pinout configuration, and drive strength.

The UCC53x0 is available in an 8-pin SOIC (D) package. This package has a creepage and clearance of 4 mm and can support isolation voltage up to 3 kVRMS, which is good for applications where basic isolation is needed. With these various options and wide power range, the UCC53x0 family is a good fit for motor drives and industrial power supplies.

The UCC53x0S option provides a split output that can be used to control the rise and fall times of the driver. The UCC53x0M option connects the gate of the transistor to an internal clamp to prevent false turnon caused by Miller current. The UCC53x0E option has its UVLO2 referenced to GND2, which facilitates bipolar supplies.

Unlike an optocoupler, the UCC53x0 family has lower part-to-part skew, lower propagation delay, higher operating temperature, and higher CMTI.

Device Information(1)

PART NUMBERMINIMUM SOURCE AND SINK CURRENTDESCRIPTION
UCC5310M2.4 A and 1.1 AMiller clamp
UCC5320S2.4 A and 2.2 ASplit output
UCC5320E2.4 A and 2.2 AUVLO with respect to IGBT emitter
UCC5350M5 A and 5 AMiller clamp
UCC5390S10 A and 10 ASplit output
UCC5390E10 A and 10 AUVLO with respect to IGBT emitter
  1. For all available packages, see the orderable addendum at the end of the data sheet.
  2. For a detailed comparison of devices, see the
    Device Comparison Table

Functional Block Diagram (S Version)

UCC5310 UCC5320 UCC5350 UCC5390 FPG-53XX-SLLSER8.gif

Revision History

Changes from A Revision (June 2017) to B Revision

  • Changed the minimum ambient operating temperature from –55°C to –40°C Go
  • Added the UCC5350 and UCC5390 devices to the data sheetGo

Changes from * Revision (June 2017) to A Revision

  • Deleted 17 A from title which is available for future 10-A deviceGo