MSP430G2313 (ACTIVE)

MSP430G2x53, MSP430G2x13 Mixed Signal Microcontroller

MSP430G2x53, MSP430G2x13 Mixed Signal Microcontroller - MSP430G2313
 

Description

The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.

The MSP430G2x13 and MSP430G2x53 series are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, up to 24 I/O capacitive-touch enabled pins, a versatile analog comparator, and built-in communication capability using the universal serial communication interface. In addition the MSP430G2x53 family members have a 10-bit analog-to-digital (A/D) converter. For configuration details see .

Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system.

Features

  • Low Supply-Voltage Range: 1.8 V to 3.6 V
  • Ultra-Low Power Consumption
    • Active Mode: 230 µA at 1 MHz, 2.2 V
    • Standby Mode: 0.5 µA
    • Off Mode (RAM Retention): 0.1 µA
  • Five Power-Saving Modes
  • Ultra-Fast Wake-Up From Standby Mode in Less Than 1 µs
  • 16-Bit RISC Architecture, 62.5-ns Instruction Cycle Time
  • Basic Clock Module Configurations
    • Internal Frequencies up to 16 MHz With Four Calibrated Frequency
    • Internal Very-Low-Power Low-Frequency (LF) Oscillator
    • 32-kHz Crystal
    • External Digital Clock Source
  • Two 16-Bit Timer_A With Three Capture/Compare Registers
  • Up to 24 Capacitive-Touch Enabled I/O Pins
  • Universal Serial Communication Interface (USCI)
    • Enhanced UART Supporting Auto Baudrate Detection (LIN)
    • IrDA Encoder and Decoder
    • Synchronous SPI
    • I2C™
  • On-Chip Comparator for Analog Signal Compare Function or Slope Analog-to-Digital (A/D) Conversion
  • 10-Bit 200-ksps Analog-to-Digital (A/D) Converter With Internal Reference, Sample-and-Hold, and Autoscan
  • Brownout Detector
  • Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse
  • On-Chip Emulation Logic With Spy-Bi-Wire Interface
  • Package Options
    • TSSOP: 20 Pin, 28 Pin
    • PDIP: 20 Pin
    • QFN: 32 Pin

View more

Parametrics Compare all products in Other MSP430 MCUs

 
Non-volatile Memory (KB)
RAM (KB)
ADC
ADC: Channels (#)
GPIO Pins (#)
I2C
SPI
UART
Comparator Channels (#)
Package Group
Approx. Price (US$)
MSP430G2313 MSP430G2203 MSP430G2213 MSP430G2303 MSP430G2403 MSP430G2413 MSP430G2513 MSP430G2553
4    2    2    4    8    8    16    16   
0.25    0.25    0.25    0.25    0.5    0.5    0.5    0.5   
Slope    N/A    Slope    N/A    N/A    Slope    10-bit SAR    10-bit SAR   
0    0    0    0    0    0    8    8   
24    24    24    24    24    24    24    24   
1    1    1    1    1    1    1    1   
1    2    1    2    2    1    1    2   
1    1    1    1    1    1    1    1   
8    0    8    0    0    8    8    8   
PDIP
TSSOP
TSSOP
VQFN   
PDIP
TSSOP
TSSOP
VQFN   
PDIP
TSSOP
TSSOP
VQFN   
PDIP
TSSOP
TSSOP
VQFN   
PDIP
TSSOP
TSSOP
VQFN   
PDIP
TSSOP
TSSOP
VQFN   
PDIP
TSSOP
TSSOP
VQFN   
PDIP
TSSOP
TSSOP
VQFN   
0.65 | 1ku    0.60 | 1ku    0.63 | 1ku    0.65 | 1ku    0.75 | 1ku    0.75 | 1ku    0.90 | 1ku    0.90 | 1ku   

WEBENCH® Designer MSP430G2313

  Min Max
Vin  V  V
Ambient Temp  °C