TAS5760L Closed Loop I2S Input Amplifier with Power Limiter, PVDDmax of 16.5V | TI.com

TAS5760L (ACTIVE)

Closed Loop I2S Input Amplifier with Power Limiter, PVDDmax of 16.5V

Closed Loop I2S Input Amplifier with Power Limiter, PVDDmax of 16.5V - TAS5760L
 

Description

The TAS5760L is a stereo I2S input device which includes hardware and software (I²C) control modes, integrated digital clipper, several gain options, and a wide power supply operating range to enable use in a multitude of applications. The TAS5760L operates with a nominal supply voltage from 4.5 to 15 VDC.

An optimal mix of thermal performance and device cost is provided in the 120-mΩ RDS(ON) of the output MOSFETs. Additionally, a thermally enhanced 48-Pin TSSOP provides excellent operation in the elevated ambient temperatures found in modern consumer electronic devices.

The entire TAS5760xx family is pin-to-pin compatible in the 48-Pin TSSOP package. Alternatively, to achieve the smallest possible solutions size for applications where pin-to-pin compatibility and a headphone or line driver are not required, a 32-Pin TSSOP package is offered for the TAS5760M and TAS5760L devices. The I2C register map in all of the TAS5760xx devices are identical, to ensure low development overhead when choosing between devices based upon system-level requirements.

Features

  • Audio I/O Configuration:
    • Single Stereo I²S Input
    • Stereo Bridge Tied Load (BTL) or Mono Parallel Bridge Tied Load (PBTL) Operation
    • 32, 44.1, 48, 88.2, 96 kHz Sample Rates
  • General Operational Features:
    • Selectable Hardware or Software Control
    • Integrated Digital Output Clipper
    • Programmable I²C Address (1101100[R/W] or 1101101[R/W])
    • Closed-Loop Amplifier Architecture
    • Adjustable Switching Frequency for Speaker Amplifier
  • Robustness Features:
    • Clock Error, DC, and Short-Circuit Protection
    • Overtemperature and Programmable Overcurrent Protection
  • Audio Performance (PVDD = 12 V, RSPK = 8 Ω, SPK_GAIN[1:0] Pins = 01)
    • Idle Channel Noise = 65 µVrms (A-Wtd)
    • THD+N = 0.09% (at 1 W, 1 kHz)
    • SNR = 100 dB A-Wtd (Ref. to THD+N = 1%)

All trademarks are the property of their respective owners.

View more

Parametrics Compare all products in Speaker Amps

 
Audio Input Type
Architecture
Speaker Channels (Max)
Power Stage Supply (Min) (V)
Power Stage Supply (Max) (V)
Output Power (W)
Load (Min) (ohms)
SNR (dB)
THD + N @ 1 kHz (%)
Iq (Typ) (mA)
Control Interface
Closed/Open Loop
Analog Supply (V) (Min)
Analog Supply (V) (Max)
Power to Parallel Bridge Tied Load (Max) (W)
Sampling Rate (Max) (kHz)
PSRR (dB)
Operating Temperature Range (C)
Rating
TAS5760L TAS5704 TAS5706B TAS5716 TAS5720L TAS5720M
Digital Input     Digital Input     Digital Input     Digital Input     Digital Input     Digital Input    
Class-D     Class-D     Class-D     Class-D     Class-D     Class-D    
Stereo     4     4     4     Mono     Mono    
4.5     10     10     10     4.5     4.5    
16.5     26     26     26     16.5     26.4    
21     20     20     20     39     39    
2     4     4     4     4     4    
100     100     99     99        
0.09     0.05     0.05     0.05     0.015     0.015    
  33     33     33     10.3     10.3    
Hardware
Software    
Hardware     Hardware
Software    
Hardware
Software    
Software     Software    
Closed     Closed     Closed     Open     Closed     Closed    
4.5     3     3     3     4.5     4.5    
16.5     3.6     3.6     3.6     16.5     26.4    
43.2     60            
192     192     192     192     96     96    
  60     60     60     87      
-25 to 85     0 to 85     0 to 85     0 to 85     -25 to 85     -25 to 85    
Catalog     Catalog     Catalog     Catalog     Catalog     Catalog