Automotive 10W Analog input Mono Class D Amplifier with SpeakerGuard(TM) - TPA3111D1-Q1

TPA3111D1-Q1 (ACTIVE)

Automotive 10W Analog input Mono Class D Amplifier with SpeakerGuard(TM)

Recommended alternative parts

  • TAS5414C-Q1  -  Automotive Analog single ended input 4-Channel Class-D Amp with load dump protection and Diagnostics
  • TAS5424C-Q1  -  Automotive Analog Differential Input 4-Channel Class-D Amp with load dump protection and Diagnostics

Description

The TPA3111D1-Q1 is a 10-W efficient, Class-D audio power amplifier for driving a bridge tied speaker. Advanced EMI suppression technology enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements. SpeakerGuard™ speaker protection system includes an adjustable power limiter and a DC detection circuit. The adjustable power limiter allows the user to set a virtual voltage rail lower than the chip supply to limit the amount of current through the speaker. The DC detect circuit measures the frequency and amplitude of the PWM signal and shuts off the output stage if the input capacitors are damaged or shorts exist on the inputs.

The TPA3111D1-Q1 can drive a mono speaker as low as 4 Ω. The high efficiency of the TPA3111D1-Q1, > 90%, eliminates the need for an external heat sink when playing music.

The outputs are fully protected against shorts to GND, VCC, and output-to-output. The short-circuit protection and thermal protection includes an auto-recovery feature.

Features

  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Device Temperature Grade 1: –40°C to 125°C Ambient
      Operating Temperature Range
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C2
  • 10-W into an 8-Ω Load at 10% THD+N from a 12-V Supply
  • 7-W into a 4-Ω Load at 10% THD+N from an 8-V Supply
  • 94% Efficient Class-D Operation into 8-Ω Load Eliminates Need for Heat Sinks
  • Wide Supply Voltage Range Allows Operation from 8 to 26 V
  • Filter-Free Operation
  • SpeakerGuard Speaker Protection Includes Adjustable Power Limiter Plus DC Protection
  • Flow Through Pin Out Facilitates Easy Board Layout
  • Robust Pin-to-Pin Short-Circuit Protection and Thermal Protection with
    Auto-Recovery Option
  • Excellent THD+N and Pop Free Performance
  • Four Selectable Fixed Gain Settings
  • Differential Inputs

View more

Parametrics Compare all products in Mid/High-Power Amplifier

 
Max. Power to Bridge Tied Load
Min. Supported Bridge Tied Load
Closed/Open Loop
Max Speaker Outputs (#)
Input Type
Control Type
Analog Supply Min [V]
Analog Supply Max [V]
Power Stage Supply Min (V)
Power Stage Supply Max (V)
Rating
Operating Temperature Range (C)
Approx. Price (US$)
Architecture
TPA3111D1-Q1 TPA3111D1 TPA3112D1 TPA3112D1-Q1
10     10     25     25    
4     4     4     4    
Closed     Closed     Closed     Closed    
1     1     1     1    
Analog     Analog     Analog     Analog    
Hardware     Hardware     Hardware     Hardware    
  8     8     8    
  26     26     26    
8     8     8     8    
26     26     26     26    
Automotive     Catalog     Catalog     Automotive    
  -40 to 85     -40 to 85     -40 to 125    
0.90 | 1ku     0.75 | 1ku     1.10 | 1ku     1.21 | 1ku    
Class D     Class D     Class D      

Other qualified versions of TPA3111D1-Q1

Version Part Number Definition
Catalog TPA3111D1 TI's standard catalog product

Related end equipment

  • Automotive Noise Generation for HEV/EV
  • Automotive Emergency Call Systems
  • PC and Laptop Mono Applications
  • Consumer Audio Electronics

SpeakerGuard is a trademark of Texas Instruments.

Featured tools and software

Click Here