Home Power management DC/DC switching regulators Step-down (buck) regulators Buck converters (integrated switch)

TPS53513

ACTIVE

1.5-V to 18-V, 8-A synchronous SWIFT™ buck converter

Product details

Vin (min) (V) 1.5 Vin (max) (V) 18 Vout (min) (V) 0.6 Vout (max) (V) 5.5 Iout (max) (A) 8 Iq (typ) (mA) 1.35 Switching frequency (min) (kHz) 250 Switching frequency (max) (kHz) 1000 Features Enable, Light Load Efficiency, Output discharge, Power good, Pre-Bias Start-Up, Synchronous Rectification Operating temperature range (°C) -40 to 85 Rating Catalog Regulated outputs (#) 1 Control mode D-CAP3 Duty cycle (max) (%) 80 Type Converter
Vin (min) (V) 1.5 Vin (max) (V) 18 Vout (min) (V) 0.6 Vout (max) (V) 5.5 Iout (max) (A) 8 Iq (typ) (mA) 1.35 Switching frequency (min) (kHz) 250 Switching frequency (max) (kHz) 1000 Features Enable, Light Load Efficiency, Output discharge, Power good, Pre-Bias Start-Up, Synchronous Rectification Operating temperature range (°C) -40 to 85 Rating Catalog Regulated outputs (#) 1 Control mode D-CAP3 Duty cycle (max) (%) 80 Type Converter
VQFN-CLIP (RVE) 28 15.75 mm² 4.5 x 3.5
  • Integrated 13.8-mΩ and 5.9-mΩ MOSFETs With
    8-A Continuous Output Current
  • Supports All Ceramic Output Capacitors
  • Reference Voltage 600 mV ±0.5% Tolerance
  • Output Voltage Range: 0.6 V to 5.5 V
  • D-CAP3™ Control Mode With Fast Load-Step Response
  • Auto-Skipping Eco-mode™ for High Light-Load Efficiency
  • FCCM for Tight Output Ripple and Voltage Requirements
  • Eight Selectable Frequency Settings from
    250 kHz to 1 MHz
  • Precharged Start-up Capability
  • Built-in Output Discharge Circuit
  • Open-Drain Power-Good Output
  • 3.5 mm × 4.5 mm, 28-Pin, VQFN Package
  • Create a Custom Design Using the TPS53513 With the WEBENCH® Power Designer
  • Integrated 13.8-mΩ and 5.9-mΩ MOSFETs With
    8-A Continuous Output Current
  • Supports All Ceramic Output Capacitors
  • Reference Voltage 600 mV ±0.5% Tolerance
  • Output Voltage Range: 0.6 V to 5.5 V
  • D-CAP3™ Control Mode With Fast Load-Step Response
  • Auto-Skipping Eco-mode™ for High Light-Load Efficiency
  • FCCM for Tight Output Ripple and Voltage Requirements
  • Eight Selectable Frequency Settings from
    250 kHz to 1 MHz
  • Precharged Start-up Capability
  • Built-in Output Discharge Circuit
  • Open-Drain Power-Good Output
  • 3.5 mm × 4.5 mm, 28-Pin, VQFN Package
  • Create a Custom Design Using the TPS53513 With the WEBENCH® Power Designer

The TPS53513 device is a small-sized, synchronous buck converter with an adaptive on-time D-CAP3 control mode. The device offers ease-of-use and low external-component count for space-conscious power systems.

This device features high-performance integrated MOSFETs, accurate 0.5% 0.6-V reference, and an integrated boost switch. Competitive features include very low external-component count, fast load-transient response, auto-skip mode operation, internal soft-start control, and no requirement for compensation.

A forced continuous conduction mode (FCCM) helps meet tight voltage regulation accuracy requirements for performance DSPs and FPGAs. The TPS53513 device is available in a 28-pin VQFN package and is specified from –40°C to +85°C ambient temperature.

The TPS53513 device is a small-sized, synchronous buck converter with an adaptive on-time D-CAP3 control mode. The device offers ease-of-use and low external-component count for space-conscious power systems.

This device features high-performance integrated MOSFETs, accurate 0.5% 0.6-V reference, and an integrated boost switch. Competitive features include very low external-component count, fast load-transient response, auto-skip mode operation, internal soft-start control, and no requirement for compensation.

A forced continuous conduction mode (FCCM) helps meet tight voltage regulation accuracy requirements for performance DSPs and FPGAs. The TPS53513 device is available in a 28-pin VQFN package and is specified from –40°C to +85°C ambient temperature.

Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Pin-for-pin with same functionality to the compared device
TPS53515 ACTIVE 1.5-V to 18-V, 12-A synchronous SWIFT™ buck converter Offers a higher IOUT with adjustable current limit, over current protection and is soft start adjustable.
TPS548A20 ACTIVE 1.5-V to 20-V, 15-A synchronous SWIFT™ buck converter Offers a higher IOUT, wider VIN and operating temperature range with frequency synchronization.
Similar functionality to the compared device
TPS53915 ACTIVE 1.5-V to 18-V, 12-A synchronous SWIFT™ buck converter with PMBus Higher current converter with PMBus, adaptive voltage scaling and over current protection.

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 15
Type Title Date
* Data sheet TPS53513 1.5-V to 18-V (4.5-V to 25-V Bias) Input, 8-A Single Synchronous Step-Down SWIFT™ Converter datasheet (Rev. C) PDF | HTML 04 Jun 2018
User guide TPS53513 Step-Down Converter Evaluation Module User's Guide (Rev. C) PDF | HTML 10 Nov 2021
Application note Point-of-Load Solutions for Data Center App Implementing VR13.HC Vccin Spec (Rev. A) PDF | HTML 08 Jan 2020
Selection guide SWIFT DC/DC Converters Selector Guide (Rev. G) 06 Feb 2019
Application note Unified Ground Connection Recommendation on TPS53K- Integrated FET-Converter Dev 25 Jan 2017
Analog Design Journal How to select input capacitors for a buck converter 26 Apr 2016
Application note Accuracy-Enhanced Ramp-Generation Design for D-CAP3 Modulation (Rev. A) 25 Apr 2016
Technical article Don’t say goodbye to your power supply PDF | HTML 07 Mar 2016
Application note SMT Guidelines for Stacked Inductor (Inductor On Top) on Voltage Regulator IC 22 Feb 2016
Technical article Power Tips: Multiphase supplies can save space PDF | HTML 02 Feb 2016
Technical article Designing a 25G system: 5 tips to balance power, performance and price PDF | HTML 01 Feb 2016
White paper Choosing the Right Variable Frequency Buck Regulator Control Strategy 02 Oct 2015
White paper Choosing the Right Variable Frequency Buck Regulator Control Strategy (PPT) 02 Oct 2015
Technical article D-CAP3 – A sequel better than the original PDF | HTML 07 May 2015
Application note D-CAP(TM) Mode With All-Ceramic Output Capacitor Application 03 Feb 2011

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS53513EVM-587 — TPS53513EVM-587 Single-Output Synchronous Step-Down Converter Evaluation Module

The TPS53513EVM evaluation module (EVM) allows users to evaluate the TPS53513. The TPS53513 is a D-CAP3™ mode, 8-A synchronous buck converter with integrated MOSFETs. It provides a fixed 1.2-V output at up to 8 A from a 12-V input bus. The TPS53513EVM is designed to demonstrate the TPS53513 (...)

User guide: PDF | HTML
Not available on TI.com
Simulation model

TPS53513 PSpice Transient Model

SLUM398.ZIP (128 KB) - PSpice Model
Simulation model

TPS53513 TINA-TI Transient Reference Design

SLUM435.ZIP (161 KB) - TINA-TI Reference Design
Simulation model

TPS53513 TINA-TI Transient Spice Model

SLUM436.ZIP (63 KB) - TINA-TI Spice Model
Calculation tool

SLURB03 TPS53513 TPS53515 TPS53915 Excel Calculator and Layout Checklist

Supported products & hardware

Supported products & hardware

Products
Buck converters (integrated switch)
TPS53513 1.5-V to 18-V, 8-A synchronous SWIFT™ buck converter TPS53515 1.5-V to 18-V, 12-A synchronous SWIFT™ buck converter TPS53915 1.5-V to 18-V, 12-A synchronous SWIFT™ buck converter with PMBus
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Reference designs

PMP11399 — PMBus Power System for Enterprise Ethernet Switches Reference Design

PMP11399 is a complete PMBus power system for 3 ASIC/FPGA cores, DDR3 core memory, VTT termination, and auxiliary voltages commonly found on high-performance Ethernet Switches. The hardware is accompanied by a GUI that allows the user to perform real-time configuration and monitoring of the power (...)
Test report: PDF
Schematic: PDF
Reference designs

PMP20721 — Synchronous Buck Integrated Converter with Pseudo Differential Remote Sense Reference Design

The PMP20721 reference design uses the TPS53513 to demonstrate a pseudo differential remote sense control. This is highly valuable for low voltage, high current rails that provide core power to processors. With differential remote sense, the I-R loss is also minimized. The design uses a typical (...)
Test report: PDF
Schematic: PDF
Reference designs

PMP10896 — Complete PMBus Power System for Enterprise Ethernet Switches Reference Design

Complete PMBus power system for 3 ASIC/FPGA cores, DDR3 core memory, and auxiliary voltages found on high-performance Ethernet Switches.
Test report: PDF
Schematic: PDF
Reference designs

PMP9667 — Core Voltage Regulator for Enterprise SSD Storage Add On Card Controller ASIC Reference Design

The PMP9667 utilizes the TPS53513 DCAP3 Mode SWIFT step down dc-dc converter to power the SSD Controller ASIC core rail at 1Vout/8A with only 250mm2 of total power supply area, and 19 total components. This design meets the high power density, small form factor requirements of PCIE-based HDD and (...)
Test report: PDF
Schematic: PDF
Package Pins Download
VQFN-CLIP (RVE) 28 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos