Step Down Converter with Bypass Mode for Ultra Low Power Wireless Applications - TPS62730

TPS62730 (ACTIVE)

Step Down Converter with Bypass Mode for Ultra Low Power Wireless Applications


Special note

See how the TPS62730 and other TI products combine to create a unique Wireless Body Sensor SOLUTION

TPS62730 with CC430

TPS62730 with CC430

Step-down Converter Plus Integrated Bypass Mode for Ultra-Low-Power Wireless Applications

Description

The TPS62730 is a high frequency synchronous step down DC-DC converter optimized for ultra low power wireless applications. The device is optimized to supply TI&3146;s Low Power Wireless sub 1GHz and 2.4GHz RF transceivers and System-On-Chip-solutions. The TPS62730 reduces the current consumption drawn from the battery during TX and RX mode by a high efficient step down voltage conversion. It provides up to 100mA output current and allows the use of tiny and low cost chip inductors and capacitors. With an input voltage range of 1.9V to 3.9V the device supports Li-primary battery chemistries such as Li-SOCl2, Li-SO2, Li-MnO2 and also two cell alkaline batteries.

The TPS62730 features an Ultra Low Power bypass mode with typical 30nA current consumption to support sleep and low power modes of TI’s CC2540 Low Energy and CC430 System-On-Chip solutions. In this bypass mode, the output capacitor of the DC/DC converter is connected via an integrated typ. 2.1Ω Bypass switch to the battery.

In DC/DC operation mode the device provides a fixed output voltage to the system. With a switch frequency up to 3MHz, the TPS62730 features low output ripple voltage and low noise even with a small 2.2µF output capacitor. The automatic transition into bypass mode during DC/DC operation prevents an increase of output ripple voltage and noise once the DC/DC converter operates close to 100% duty cycle. The device automatically enters bypass mode once the battery voltage falls below the transition threshold VIT BYP. The TPS62730 is available in a 1 × 1.5mm2 6 pin QFN package.

Features

  • Input Voltage Range VIN from 1.9V to 3.9V
  • Typ. 30 nA Ultra Low Power Bypass Mode
  • Typ. 25 µA DC/DC Quiescent Current
  • Internal Feedback Divider Disconnect
  • Typ. 2.1Ω Bypass Switch between VIN and VOUT
  • Automatic Transition from DC/DC to Bypass Mode
  • Up To 3MHz switch frequency
  • Up to 95% DC/DC Efficiency
  • Open Drain Status Output STAT
  • Output Peak Current up to 100mA
  • Fixed Output Voltages 1.9V, 2.05V, 2.1V, 2.3V
  • Small External Output Filter Components 2.2µH/ 2.2µF
  • Optimized For Low Output Ripple Voltage
  • Small 1 × 1.5 × 0.6mm3 SON Package
  • 12 mm2 Minimum Solution Size

View more

Parametrics Evaluate all products in Step-Down (Buck) Converter

  TPS62730 Compare
Edit to find similar devices
Regulated Outputs (#) 1
Vin (Min) (V) 1.9
Vin (Max) (V) 3.9
Vout (Min) (V) 2.1
Vout (Max) (V) 2.1
Iout (Max) (A) 0.1
Iout2 (Max) (A) -
Vout2 (Min) (V) -
Vout2 (Max) (V) -
Topology Buck
  • Boost
  • Buck
  • Buck-Boost
  • Inverting Buck-Boost
Switching Frequency (Max) (kHz) -
Switch Current Limit (Typ) (A) 0.41
Iq (Typ) (mA) 0.025
Duty Cycle (Max) (%) 100
Soft Start Fixed
  • Adjustable
  • Fixed
  • None
Compensation Internal
  • External
  • Internal
  • Not Needed
Special Features Enable
Light Load Efficiency
Synchronous Rectification
  • Adjustable Current Limit
  • Adjustable UVLO
  • Dynamic Voltage Scaling
  • Enable
  • Frequency Synchronization
  • Light Load Efficiency
  • Phase Interleaving
  • Power Good
  • Synchronous Rectification
  • Tracking
Control Mode -
  • COT with emulated ripple
  • Constant on-time (COT)
  • Current Mode
  • D-CAP
  • D-CAP+
  • D-CAP2
  • D-CAP3
  • Voltage Mode
Preset Vout (V) 2.1
Vref Accuracy (Typ) (%) 1.5
Rating Catalog
  • Automotive
  • Catalog
  • HiRel Enhanced Product
  • High Temp
  • Military
  • Space
Operating Temperature Range (C) -40 to 85 °C to °C
Approx. Price (US$) 0.65 | 1ku
Package Group SON
  • CFP
  • DDPAK/TO-263
  • DSBGA
  • DSLGA
  • HTSSOP
  • LQFN-CLIP
  • LSON-CLIP
  • MSOP-PowerPAD
  • PDIP
  • QFN
  • SO PowerPAD
  • SOIC
  • SON
  • SOT
  • SOT-23
  • TO-220
  • TO-263
  • TSSOP
  • USON
  • VQFN
  • VQFN-CLIP
  • VSON
  • VSSOP
  • WQFN
  • WSON
  • XCEPT
  Sample & Buy Reset Update

So what do you think? Leave a comment about this table...

Companion parts

Part # Name Product Family Comments
CC1121   High Performance Low Power RF Transceiver   Wireless Connectivity - SUB-1 GHZ    Using a DC-DC Converter to Reduce Power (Current) Consumption In CC430 Systems
See Literature slaa500  
CC1110F16   Sub-1GHz System-on-Chip with MCU and 16kB Flash memory   Wireless Connectivity - SUB-1 GHZ    Using a DC-DC Converter to Reduce Power (Current) Consumption In CC430 Systems
See Literature slaa500  
CC1110F32   Sub-1GHz System-on-Chip with MCU and 32kB Flash memory   Wireless Connectivity - SUB-1 GHZ    Using a DC-DC Converter to Reduce Power (Current) Consumption In CC430 Systems
See Literature slaa500  
CC1110F8   Sub-1GHz System-on-Chip with MCU and 8kB Flash memory   Wireless Connectivity - SUB-1 GHZ    Using a DC-DC Converter to Reduce Power (Current) Consumption In CC430 Systems
See Literature slaa500  
CC1101   Low-Power Sub-1GHz RF Transceiver   Wireless Connectivity - 6LoWPAN    Using a DC-DC Converter to Reduce Power (Current) Consumption In CC430 Systems
See Literature slaa500  
CC1150   Highly Integrated Multichannel RF Transmitter Designed for Low-Power Wireless Applications   Wireless Connectivity - SUB-1 GHZ    Using a DC-DC Converter to Reduce Power (Current) Consumption In CC430 Systems
See Literature slaa500  
CC1100E   Low-Power Sub-1GHz RF Transceiver for China and Japan frequency bands   Wireless Connectivity - SUB-1 GHZ    Using a DC-DC Converter to Reduce Power (Current) Consumption In CC430 Systems
See Literature slaa500  
Click Here