TIDA-00909

48V/10A High Frequency PWM 3-Phase GaN Inverter Reference Design for High-Speed Drives

TIDA-00909

Design files

Overview

Low voltage, high-speed drives and/or low inductance brushless motors require higher inverter switching frequencies in the range of 40 kHz to 100 kHz to minimize losses and torque ripple in the motor. The TIDA-00909 reference design achieves that by using a 3-phase inverter with three 80V/10A half-bridge GaN power modules LMG5200 and uses shunt based phase current sensing. Gallium nitride (GaN) transistors can switch much faster than silicon FETs and integrating the GaN FET and driver in the same package reduces parasitic inductances and optimizes switching performance reducing losses, thus allowing to down-size or eliminate the heatsink. The TIDA-00909 offers a TI BoosterPack compatible interface to connect to a C2000 MCU LaunchPad™ development kit for easy performance evaluation.

Features

3-phase GaN inverter with wide input voltage range 12V to 60V and 7Arms/10Apeak output current, tested up to 100 kHz PWM.
GaN power stage with greatly reduced switching losses allows high PWM switching frequencies with peak efficiency up to 98.5% at 100 kHz PWM
LMG5200 GaN half-bridge power stage ease PCB layout and reduce parasitic inductances for optimized switching performance, less than 2ns rise/fall time.
Very low switch node voltage over- and undershoot with very low 12.5ns dead band minimize phase voltage ringing, as well as reduce phase voltage distortions and EMI.
Precision shunt-based phase current sensing with high accuracy (0.1%).
TI BoosterPack compatible interface with 3.3V I/O for easy performance evaluation with a C2000 MCU LaunchPad™ development kit.

Automotive

2-wheeler & 3-wheeler traction drive

Industrial

??image.gallery.download_en_US?? View video with transcript Video

A fully assembled board has been developed for testing and performance validation only, and is not available for sale.

Design files & products

Design files

Download ready-to-use system files to speed your design process.

download

Design guide — TIDA-00909

TIDUCE7B.PDF (8383 K)

Reference design overview and verified performance test data

download

Schematic — TIDA-00909

TIDROK2.PDF (829 K)

Detailed schematic diagram for design layout and components

download

Bill of materials (BOM) — TIDA-00909

TIDROK3.PDF (72 K)

Complete listing of design components, reference designators, and manufacturers/part numbers

download

Assembly drawing — TIDA-00909

TIDROK4.PDF (554 K)

Detailed overview of design layout for component placement

download

CAD/CAE symbol — TIDA-00909

TIDROK6.ZIP (5846 K)

Files used for 3D models or 2D drawings of IC components

download

Gerber file — TIDA-00909

TIDCCV4.ZIP (1218 K)

Design file that contains information on physical board layer of design PCB

download

PCB layout — TIDA-00909

TIDROK5.PDF (2813 K)

PCB layer plot file used for generating PCB design layout

Products

Includes TI products in the design and potential alternatives.

AC/DC & DC/DC converters (integrated FET)

LM5018 — 7.5-100V Wide Vin, 300mA Constant On-Time Synchronous Buck Regulator

Data sheet: PDF | HTML

Analog current-sense amplifiers

INA240 — -4 to 80V, bidirectional, ultra-precise current sense amplifier with enhanced PWM rejection

Data sheet: PDF | HTML

Direction-controlled voltage translators

SN74AVC8T245 — 8-Bit Dual-Supply Bus Transceiver with Configurable Voltage-Level Shifting and 3-State Outputs

Data sheet: PDF | HTML

Gallium nitride (GaN) power stages

LMG5200 — 80V GaN Half Bridge Power Stage

Data sheet: PDF | HTML

Linear & low-dropout (LDO) regulators

LP38691 — 500-mA, 10-V, low-dropout voltage regulator

Data sheet: PDF | HTML

Series voltage references

REF3333 — 3.3-V, 30-ppm/°C drift, 3.9-µA, 3-pin SOT-23, 3-pin SC70, 8-pin UQFN voltage reference

Data sheet: PDF | HTML

Temperature switches

TMP302-Q1 — Automotive, Pin-Selectable Trip Point 1.4V-Capable Family of Temperature Switches

Data sheet: PDF | HTML

Start development

Software

Support software

TIDCCV5 — TIDA-00909_InstaSPIN-FOC_F28069M Software

lock

= Requires export approval (1 minute)

lock

Download

TIDCCV5 — TIDA-00909_InstaSPIN-FOC_F28069M Software

Latest version

Version: 01.00.00.00

Release date: 03 Nov 2016

open-in-new

View all versions

lock

TIDA-00909_InstaSPIN-FOC_F28069M Software (zip) — 41 K

Checksum

lock

= Requires export approval (1 minute)

Technical documentation

star

= Top documentation selected by TI

No results found. Please clear your search and try again.

View all 3

	Type	Title		Date
*	Design guide	48V/10A High-Frequency PWM, 3-Phase GaN Inverter Reference Design for HS Motors (Rev. B)		Apr. 03, 2017
	Technical article	Five benefits of enhanced PWM rejection for in-line motor control	PDF \| HTML	Nov. 08, 2016
	Technical article	What’s next for Industry 4.0? The best new technologies shaping the future of smar	PDF \| HTML	Nov. 07, 2016