XDS110 JTAG 调试探针

(正在供货) TMDSEMU110-U

描述/特性

技术文档

支持与培训

订购选项


立即订购
器件型号 从德州仪器 (TI) 或第三方购买 结帐选项 状态

TMDSEMU110-U:
XDS110 JTAG Debug Probe

$99.00(USD)


价格可能会不同



ACTIVE
主要文档
Download - PDF Icon Download - PDF Icon

描述

The Texas Instruments XDS110 is a new class of debug probe (emulator) for TI embedded processors. The XDS110 replaces the XDS100 family while supporting a wider variety of standards (IEEE1149.1, IEEE1149.7, SWD) in a single pod. Also, all XDS debug probes support Core and System Trace in all ARM and DSP processors that feature an Embedded Trace Buffer (ETB).

The Texas Instruments XDS110 connects to the target board via a TI 20-pin connector (with multiple adapters for TI 14-pin and, ARM 10-pin and ARM 20-pin) and to the host PC via USB2.0 High Speed (480Mbps). It also features two additional connections: the Auxiliary 14-pin port connector that enables EnergyTrace™, a full duplex UART port and four General-Purpose I/Os, and the Expansion 30-pin connector to connect the XDS110 EnergyTrace HDR add-on.

If you are using Code Composer Studio you need to have version 7.0 or later.

The XDS110 comes in a package consisting of:

  • XDS110 debug pod
  • 20-pin debug cable
  • 14-pin auxiliary cable
  • TI 20-pin to TI 14-pin converter adapter
  • TI 20-pin to ARM Cortex 20-pin converter adapter
  • TI 20-pin to ARM Cortex 10-pin converter adapter
  • USB cable
  • Breakout board for auxiliary cable
  • Quick start guide

Devices supported:

  • SimpleLink MCUs (CC13xx, CC26xx, CC3x, MSP432)
  • C2000, TM4C12x and Hercules microcontrollers
  • Sitara (AM335x, AM43xx, AM57xx, AM65xx, AMIC1xx)
  • Automotive SoCs (TDAx ADAS, DRAx infotainment)
  • mmWave sensors (IWR/AWR14xx, IWR/AWR16xx, IWR68xx)
  • C674x and C66x (Keystone I) Floating point DSPs
  • C642x and C645x
  • 66AK2 and TCI66x Multicore DSP + ARM® SoCs (Keystone II)
  • C55x Low-power DSPs
  • UCD3x Digital Power devices
  • PGA970 SoC
  • Other TI SoCs with PRU, C674x, C66xx, Cortex M, Cortex R and Cortex A cores
Devices NOT supported:
  • MSP430 Microcontrollers
  • ARM9 based processors that use adaptive clocking such as OMAPL13x, AM1xxx, DM64xx
  • AWR12xx mmWave sensors
  • C54x
  • C62x, C670x, C671x, C672x, C640x and C641x
Features
  • Serial Wire Debug (SWD) and Serial Wire Output (SWO) are available for selected microcontrollers and wireless connectivity microcontrollers
  • Core and System trace are available via the ETB in selected ARM and DSP processors
  • For more information on the trace capabilities of a particular device please refer to its technical reference manual (TRM)

You will need:

  • An installation of Code Composer Studio v7 (or later) or a compatible 3rd party development environment.
  • A target board that features one of the compatible JTAG headers.

You may need:

  • An adapter to allow connecting to target boards that features different JTAG headers

Shipping information:

  • Product box dimensions: 260mm x 200mm x 50mm (10.0in x 8.0in x 2.0in)
  • Packaged product weight: 240g (8.0oz)

特性

The XDS110 is the latest entry level debug probe (emulators) for TI embedded processors. Designed to be a complete solution that delivers JTAG and SWD connectivity at a low cost, the XDS110 is the debug probe of choice for entry-level debugging of TI microcontrollers, processors and SimpleLink devices.

The XDS110 replaces the XDS100 technology and is the first debug probe that supports all TI devices with JTAG, cJTAG and SWD/SWO debug port in a single product. Also, both Core Processor and System Trace are available for all ARM and DSP devices that support Embedded Trace Buffer (ETB).

The XDS110 is also the first of the XDS family of debug probes to feature EnergyTrace for MSP432 and its add-on module XDS110 EnergyTrace HDR for SimpleLink wireless connectivity devices. EnergyTrace is a technology that allows measuring the true Energy and Power consumption of the target board and it can measure up to 75mA natively and up to 800mA with the add-on module. As an added flexibility, the same physical connection for EnergyTrace also features one UART port and four GPIOs for total hardware control.

The XDS110 is designed to replace the aging XDS100 family of JTAG debuggers with higher JTAG and cJTAG data throughput, added support for ARM Serial Wire debug modes at the same cost.

Following the trend for space reduction on modern TI development boards, the XDS110 features a standard TI 20-pin connector as the primary JTAG connectivity to the target. In addition to that, all variants feature modular target configuration adapters for TI and ARM standard JTAG headers (the offer of adapters varies per model).

The XDS110 family supports the traditional IEEE1149.1 (JTAG) as well as IEEE1149.7 (cJTAG) and ARM Serial Wire Debug (SWD)/Serial Wire Output (SWO) and operates with interface levels of +1.8V up to +3.6V.

IEEE1149.7 or Compact JTAG (cJTAG) is a major improvement over the traditional JTAG, as it supports all its features while using only two pins, and is available in selected TI wireless connectivity microcontrollers.

Serial Wire Debug (SWD) is a debug mode that uses two pins (JTAG uses four) and transfers data at a higher clock rate when compared to JTAG. Serial Wire Output (SWO) adds one more pin that allows performing simple Trace operations on selected Cortex M4 microcontrollers.

The XDS110 supports either USB2.0 Full Speed (11Mbps) or High Speed (480Mbps) connection to the host.

The XDS110 family is fully compatible with TI’s Code Composer Studio IDE. This combination gives a complete hardware development environment which includes an Integrated Debug Environment, Compiler, and full hardware debugging and Trace capability on selected TI microcontrollers, processors and wireless connectivity microcontrollers.

Other XDS products:


包含项目

  • XDS110 debug pod
  • 20-pin debug cable
  • 14-pin auxiliary cable
  • TI 20-pin to TI 14-pin converter adapter
  • TI 20-pin to ARM Cortex 20-pin converter adapter
  • TI 20-pin to ARM Cortex 10-pin converter adapter
  • USB2.0 cable
  • English Quick start guide leaflet
  • Korean Quick start guide leaflet
  • Terms and conditions leaflet

技术文档
应用手册 (1)
标题 摘要 类型 大小 (KB) 日期 查看次数 下载最新英文版本
PDF 484 2018年 5月 11日 0
用户指南 (2)
标题 摘要 类型 大小 (KB) 日期 查看次数 TI 推荐 下载最新英文版本
PDF 972 2016年 11月 2日 0
PDF 772 2016年 9月 16日 0
更多文献资料 (1)
标题 摘要 类型 大小 (KB) 日期 查看次数 下载最新英文版本
PDF 39 2017年 1月 26日 0
相关产品

开发工具 (1)

名称 器件型号 工具类型
Code Composer Studio (CCS) 集成开发环境 (IDE)  CCSTUDIO  软件开发工具、IDE、编译器 

TI 器件 (22)

器件型号 名称 产品系列
AM5706  Sitara 处理器:成本经优化的 Arm Cortex-A15 和 DSP 以及安全引导  Sitara 处理器 
AM5708  Sitara 处理器:成本经优化的 Arm Cortex-A15 和 DSP,多媒体和安全引导  Sitara 处理器 
AM5718-HIREL  AM5718-HIREL Sitara™ 处理器器件版本 2.0  Sitara 处理器 
CC3220R  SimpleLink™ Wi-Fi® 和物联网单芯片无线 MCU 解决方案  SimpleLink 解决方案 
CC3220S  SimpleLink Wi-Fi® 和物联网单芯片无线 MCU 解决方案  SimpleLink 解决方案 
CC3220SF  SimpleLink Wi-Fi® 和物联网单芯片无线 MCU 解决方案  SimpleLink 解决方案 
DRA71  适用于信息娱乐系统和仪表组的单核 ARM Cortex-A15 SoC 处理器和 3D GPU(17mm 封装)  汽车处理器 
DRA75  适用于汽车信息娱乐系统的双核 ARM Cortex-A15 SoC 处理器、3D GPU 和扩展外设  汽车处理器 
DRA79  适用于音频放大器且带 DSP 的 300MHz ARM Cortex-A15 SoC 处理器  汽车处理器 
MSP432P4011  具有精密 ADC、2MB 闪存和 256KB RAM 的 SimpleLink 超低功耗 32位 Arm Cortex-M4F MCU  SimpleLink MCU 
MSP432P4011T  具有精密 ADC、2MB 闪存和 256KB RAM 的 SimpleLink 超低功耗 32位 Arm Cortex-M4F MCU  SimpleLink MCU 
MSP432P401V  具有精密 ADC、512KB 闪存和 128KB RAM 的 SimpleLink 超低功耗 32位 Arm Cortex-M4F MCU  SimpleLink MCU 
MSP432P401VT  具有精密 ADC、512KB 闪存和 128KB RAM 的 SimpleLink 超低功耗 32位 Arm Cortex-M4F MCU  SimpleLink MCU 
MSP432P401Y  具有精密 ADC、1MB 闪存和 256KB RAM 的 SimpleLink 超低功耗 32位 Arm Cortex-M4F MCU  SimpleLink MCU 
MSP432P401YT  具有精密 ADC、1MB 闪存和 256KB RAM 的 SimpleLink 超低功耗 32位 Arm Cortex-M4F MCU  SimpleLink MCU 
MSP432P4111  具有精密 ADC、2MB 闪存和 256KB RAM 的 SimpleLink 超低功耗 32位 Arm Cortex-M4F MCU  SimpleLink MCU 
MSP432P4111T  具有精密 ADC、2MB 闪存和 256KB RAM 的 SimpleLink 超低功耗 32位 Arm Cortex-M4F MCU  SimpleLink MCU 
MSP432P411V  具有精密 ADC、512KB 闪存和 128KB RAM 的 SimpleLink 超低功耗 32位 Arm Cortex-M4F MCU  SimpleLink MCU 
MSP432P411VT  具有精密 ADC、512KB 闪存和 128KB RAM 的 SimpleLink 超低功耗 32位 Arm Cortex-M4F MCU  SimpleLink MCU 
MSP432P411Y  具有精密 ADC、1MB 闪存和 256KB RAM 的 SimpleLink 超低功耗 32位 Arm Cortex-M4F MCU  SimpleLink MCU 
MSP432P411YT  具有精密 ADC、1MB 闪存和 256KB RAM 的 SimpleLink 超低功耗 32位 Arm Cortex-M4F MCU  SimpleLink MCU 
TDA2E-17  适用于 ADAS 应用且具有图形/视频加速功能的 SoC 处理器(17mm 封装)  汽车处理器 

支持与培训

搜索我们广泛的在线知识库,可全天候获得数百万个技术问题和答案。

从 TI 专家处搜索答案

由TI和其社区用户提供的内容仅符合当时状况,不视为TI的标准说明。
请详见网站使用条款

如果您对质量、包装或订购 TI 产品有疑问,请访问我们的支持页面

Blogs