PLABS-SAR-EVM-PDK

TI Precision Labs SAR ADC Evaluation Module Performance Demonstration Kit (PDK)

PLABS-SAR-EVM-PDK

Order now

Overview

PLABS-SAR-EVM-PDK is an experimental platform used in conjunction with TI Precision Labs videos to gain a deeper understanding of successive approximation register (SAR) analog-to-digital converter (ADC) circuits. The evaluation module (EVM) platform contains two channels for common SAR ADC circuits that can be easily connected to the precision signal injector evaluation module (PSIEVM), which can provide a low-distortion, low-noise input signal for driving the SAR ADC; the third channel is designed to show a power-consumption scaling with different throughput on an ultra-low-power ADC. The EVM platform also contains 10 coupon boards that can be installed on the motherboard to show performance impact with a different front-end driving circuit.

The PLABS-SAR-EVM-PDK User's Guide shows configuration examples of the EVM with the portable PSIEVM, but the EVM works with any standard test equipment.

TI Precision Labs is the industry’s first comprehensive online classroom for analog engineers. PLABS-SAR-EVM-PDK is the industry’s first offering for data converters.

 

Features
  • Intuitive setup – PCB overlay shows the schematic
  • No external power supply required
  • Includes several coupon boards with different driving amplifier RC filters to facilitate experimentation
  • Ships with PHI controller - provides convenient interface to EVM over USB 2.0 (or higher) for power delivery, as well as digital I/O
  • Software suite includes
    • Graphical tools for data capture
    • Spectral analysis
    • Output code histogram generation

  • PLABS-SAR-EVM board
  • PHI EVM controller
  • PSI evaluation module (PSIEVM)
  • Coupon board (10)
  • USB cable (2)
  • SMA cable (1)

Precision ADCs
ADS1220 24-bit, 2-kSPS, four-channel, low-power, delta-sigma ADC with PGA, VREF, SPI and two IDACs ADS7042 12-Bit 1MSPS Ultra-Low-Power Ultra-Small-Size SAR ADC With SPI Interface ADS8860 16-bit, 1-MSPS, 1-channel SAR ADC with single-ended input, SPI and daisy chain ADS8862 16-Bit, 680-kSPS, 1-Ch SAR ADC with Single-Ended Input, SPI Interface and Daisy-Chain ADS8864 16-Bit, 400-kSPS, 1-Ch SAR ADC with Single-Ended Input, SPI Interface and Daisy-Chain ADS8866 16-Bit, 100-kSPS, 1-Ch SAR ADC with Single-Ended Input, SPI Interface and Daisy-Chain

 

Instrumentation amplifiers
INA326 Precision, Low Drift, CMOS Instrumentation Amplifier

 

Linear & low-dropout (LDO) regulators
TPS7A47 1-A, 36-V, low-noise, high-PSRR, low-dropout voltage regulator with enable

 

Precision op amps (Vos<1mV)
OPA2320 Dual, precision, zero-crossover, 20-MHz, 0.9-pA Ib, RRIO, CMOS operational amplifier OPA320 Precision, zero-crossover, 20-MHz, 0.9-pA Ib, RRIO, CMOS operational amplifier OPA376 Precision (0.025mV), low noise (7.5nV/rtHz), low quiescent current (760uA) op amp

 

Series voltage references
REF5030 3-V, 3-µVpp/V noise, 3-ppm/°C drift precision series voltage reference REF5050 5-V, 3-µVpp/V noise, 3-ppm/°C drift precision series voltage reference REF6050 5-V, 5-ppm/°C high-precision voltage reference with integrated buffer & enable pin
Download View video with transcript Video

Order & start development

Evaluation board

PLABS-SAR-EVM-PDK — TI Precision Labs SAR ADC Evaluation Module Performance Demonstration Kit (PDK)

Log in to order
In stock / Out of stock
Limit:
Not available on TI.com
Support software

SBAC190 — PLABS-SAR-EVM-PDK Setup Toolkit

Supported products & hardware
Download

SBAC190 PLABS-SAR-EVM-PDK Setup Toolkit

close
Latest version
Version: 01.00.00.0B
Release date: 03 Sep 2018

Checksum
lock = Requires export approval (1 minute)
Hardware development
Evaluation board
PLABS-SAR-EVM-PDK TI Precision Labs SAR ADC Evaluation Module Performance Demonstration Kit (PDK)

Release Infomation

The design resource accessed as www.ti.com/lit/zip/sbac190 or www.ti.com/lit/xx/sbac190b/sbac190b.zip has been migrated to a new user experience at www.ti.com/tool/download/SBAC190. Please update any bookmarks accordingly.
TI's Standard Terms and Conditions for Evaluation Items apply.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​

Videos