Cart 
Lowest Power, Single and Dual ADC Drivers
Consumes 33% less power than competition
Delivering best-in-class power consumption, bandwidth, slew rate and THD the OPA2836 and its product family provide excellent dynamic range, DC precision, and are ideal for driving 12, 14, and 16-bit SAR and Delta-Sigma ADCs.
| Low Power, RRO, SAR and Delta-Sigma Drivers | ||||||||||
| Device | Type | Ch | Band -width (MHz) |
Slew Rate (V/µs) |
HD2/ HD3 (dBc) |
Input Voltage (nV/ √Hz) |
Iq/Ch (mA) | Vsupply (V) | Free Sample | Eval. Module (EVM) |
OPA2836 Datasheet |
Single-Ended | 2 | 205 | 560 | 133/140 | 4.6 | 1 | 2.5 - 5.5 |  Order |
Order |
| OPA2835Datasheet |
Single-Ended | 2 | 56 | 160 | 135/140 | 9.3 | 0.25 | 2.5 - 5.5 | Order |
Order |
| OPA835 | Single-Ended | 1 | 56 | 160 | 135/140 | 9.3 | 0.25 | 2.5 - 5.5 | Order |
Order |
| OPA836 | Single-Ended | 1 | 205 | 560 | 133/140 | 4.6 | 1 | 2.5 - 5.5 | Order |
Order |
| OPA830 | Single-Ended | 1 | 250 | 500 | 100/105 | 9.2 | 3.9 | 3 - 11 | Order |
Order |
| Fully Differential, Low Power, RRO, SAR and Delta-Sigma Drivers | ||||||||||
| Device | Type | Ch | Band -width (MHz) |
Slew Rate (V/µs) |
HD2/ HD3 (dBc) |
Input Voltage (nV/ √Hz) |
Iq/Ch (mA) | Vsupply (V) | Free Sample | Eval. Module (EVM) |
| THS4531 | Full Diff | 1 | 35 | 200 | 122/130 | 10 | 0.25 | 2.5 - 5.5 | Order |
|
| THS4521 | Full Diff | 1 | 145 | 490 | 133/140 | 4.6 | 1.14 | 2.5 - 5.5 | Order |
Order |
| THS4522 | Full Diff | 2 | 145 | 490 | 133/140 | 4.6 | 1.14 | 2.5 - 5.5 | Order |
Order |
| THS4524 | Full Diff | 4 | 145 | 490 | 133/140 | 4.6 | 1.14 | 2.5 - 5.5 | Order |
Order |
| THS4131 | Full Diff | 1 | 150 | 51 | 100/105 | 1.3 | 16 | 5 - 30 | Order |
Order |
| Fully Differential Pipeline ADC Driver | |||||||||
| Device | Ch | Band -width (MHz) |
Slew Rate (V/µs) |
HD2/ HD3 (dBc) |
Input Voltage (nV/ √Hz) |
Iq/Ch (mA) | Vsupply (V) | Free Sample | Eval. Module (EVM) |
| THS770006 | 1 | 2400 | 3100 | 87/103 | 1.7 | 100 | 4.74 - 5.25 | Order |
Order |
| PGA870 | 1 | 650 | 2800 | 93/88 | 143 | 4.75 - 5.25 | Order |
Order |
|
| THS4509 | 1 | 2000 | 6600 | 75/80 | 1.9 | 37.7 | 3 - 5.25 | Order |
Order |
| THS4508 | 1 | 2000 | 6400 | 72/80 | 2.3 | 39.2 | 3.75 - 5.25 | Order |
Order |
| THS4511 | 1 | 1600 | 4900 | 72/87 | 2 | 39.2 | 3.75 - 5.25 | Order |
Order |
| THS4520 | 1 | 620 | 570 | 115/123 | 2 | 14 | 3 - 5.25 | Order |
Order |
| THS4150 | 1 | 150 | 650 | 83/89 | 7.6 | 17.5 | 5 - 30 | Order |
Order |
| LMH6521 | 2 | 1200 | - | -84/83 | 7.3 | 225 | 5 | ||
| LMH6522 | 4 | 1400 | - | -88/99 | 8.5 | 465 | 5 | ||
| High Speed Amplifier | |||||||||
| Device | Ch | Band -width (MHz) |
Slew Rate (V/µs) |
HD2/ HD3 (dBc) |
Input Voltage (nV/ √Hz) |
Iq (mA) | Vsupply (V) | Free Sample | Eval. Module (EVM) |
| OPA695 |
1 | 1700 | 2900 | 78/86 | 1.8 | 12.9 | ±1.5 - ±6 | Order |
Order |
| OPA2695 |
2 | 1100 | 2900 | 78/81 | 1.8 | 12.9 | ±1.5 - ±6 | Order |
Order |
| Cascadable High Intermediate Frequency Amplifier | ||||||||||
| Device | Ch | Band -width (MHz) |
OIP3 (dBm) | P1dB (dBm) | Gain (dB) | NF (dB) | Iq (mA) | Vsupply (V) | Free Sample | Eval. Module (EVM) |
| THS9000 |
1 | 300 | 36 | 20.8 | 15.6 | <4.5 | 20 | 2.7 - 5 | Order |
Order |
| THS9001 |
1 | 350 | 37 | 20.6 | 15 | <4 | 20 | 2.7 - 5 | Order |
Order |
Guides
High Speed Amplifiers
Selection Guide
(PDF - 586 KB)
Download
Media Coverage
- Press Release
- En-Genius.com – Nov. 7, 2011
OPA836/OPA2836: ADC Drivers Set Standard in Power/Performance - EE Times Product Review
Additional Resources
- OPA835 Ultra Low-Power Op Amp Applications
- OPA836 Low-Power Op Amp Applications
- Single-Supply Operation of Operational Amplifiers
- Noise Analysis for High Speed Op Amps (Rev. A)
- Op Amp Performance Analysis
- Using single-supply fully diff. amps with neg. input voltages to drive ADCs
- Fully differential amplifiers applications: Line termination, driving high-speed ADCs, and differential transmission lines
- Driving High-Speed A/D Converters
Tools and Software
Visit the Amplifiers forum to ask questions and share knowledge with fellow engineers
