Home Power management LED drivers LED display drivers

TLC5928

ACTIVE

16 channel constant current LED driver with LED open Detection

Product details

Features Error Flag, LED Open Detection, ON/OFF LED Driver Data transfer rate (typ) (MHz) 35 Ch to ch accuracy (typ) (±%) 1 Rating Catalog Operating temperature range (°C) -40 to 85
Features Error Flag, LED Open Detection, ON/OFF LED Driver Data transfer rate (typ) (MHz) 35 Ch to ch accuracy (typ) (±%) 1 Rating Catalog Operating temperature range (°C) -40 to 85
HTSSOP (PWP) 24 49.92 mm² 7.8 x 6.4 SSOP (DBQ) 24 51.9 mm² 8.65 x 6 TSSOP (PW) 24 49.92 mm² 7.8 x 6.4 VQFN (RGE) 24 16 mm² 4 x 4
  • 16 Channels, Constant-Current Sink Output with On/Off Control
  • 35-mA Capability (Constant-Current Sink)
  • 10-ns High-Speed Constant-Current Switching Transient Time
  • Low On-Time Error
  • LED Power-Supply Voltage up to 17 V
  • VCC = 3.0 V to 5.5 V
  • Constant-Current Accuracy:
    • Channel-to-Channel = ±1%
    • Device-to-Device = ±1%
  • CMOS Logic Level I/O
  • 35-MHz Data Transfer Rate
  • 20-ns BLANK Pulse Width
  • Readable Error Information:
    • LED Open Detection (LOD)
    • Pre-Thermal Warning (PTW)
  • Operating Temperature: –40°C to +85°C
  • APPLICATIONS
    • LED Video Displays
    • Message Boards
    • Illumination

    PowerPAD is a trademark of Texas Instruments, Inc.
    All other trademarks are the property of their respective owners.

    • 16 Channels, Constant-Current Sink Output with On/Off Control
    • 35-mA Capability (Constant-Current Sink)
    • 10-ns High-Speed Constant-Current Switching Transient Time
    • Low On-Time Error
    • LED Power-Supply Voltage up to 17 V
    • VCC = 3.0 V to 5.5 V
    • Constant-Current Accuracy:
      • Channel-to-Channel = ±1%
      • Device-to-Device = ±1%
    • CMOS Logic Level I/O
    • 35-MHz Data Transfer Rate
    • 20-ns BLANK Pulse Width
    • Readable Error Information:
      • LED Open Detection (LOD)
      • Pre-Thermal Warning (PTW)
    • Operating Temperature: –40°C to +85°C
  • APPLICATIONS
    • LED Video Displays
    • Message Boards
    • Illumination

    PowerPAD is a trademark of Texas Instruments, Inc.
    All other trademarks are the property of their respective owners.

    The TLC5928 is a 16-channel, constant-current sink LED driver. Each channel can be turned on/off by writing serial data to an internal register. The constant-current value of all 16 channels is set by a single external resistor.

    The TLC5928 has two error detection circuits: one for LED open detection (LOD) and one for a pre-thermal warning (PTW). LOD detects a broken or disconnected LED and LEDs shorted to GND while the constant-current output is on. PTW indicates a high temperature condition.

    The TLC5928 is a 16-channel, constant-current sink LED driver. Each channel can be turned on/off by writing serial data to an internal register. The constant-current value of all 16 channels is set by a single external resistor.

    The TLC5928 has two error detection circuits: one for LED open detection (LOD) and one for a pre-thermal warning (PTW). LOD detects a broken or disconnected LED and LEDs shorted to GND while the constant-current output is on. PTW indicates a high temperature condition.

    Download View video with transcript Video

    Technical documentation

    star =Top documentation for this product selected by TI
    No results found. Please clear your search and try again.
    View all 4
    Type Title Date
    * Data sheet 16-Channel, Constant-Current LED Driver with LED Open Detection datasheet (Rev. E) 26 Jan 2011
    White paper Common LED Functions and LED Driver Design Considerations 21 Sep 2020
    Selection guide Power Management Guide 2018 (Rev. R) 25 Jun 2018
    Technical article Who tampered with my PLC? Are industrial control systems too flexible? PDF | HTML 05 Aug 2016

    Design & development

    For additional terms or required resources, click any title below to view the detail page where available.

    Simulation model

    TLC5928 IBIS Model

    SLIM244.ZIP (30 KB) - IBIS Model
    Simulation tool

    PSPICE-FOR-TI — PSpice® for TI design and simulation tool

    PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
    Reference designs

    TIDA-01552 — 8 Channel, 2-A High-Side Driver Reference Design for Digital Output Modules

    This eight-channel, parallel, 2-A, high-side, digital output reference design for factory automation applications like PLCs shows the diagnostic features and the power density of new Texas Instruments high-side driver components (such as TPS27S100). Each output can individually measure the output (...)
    Design guide: PDF
    Schematic: PDF
    Reference designs

    TIDA-00560 — 16-channel Status LED Driver for PLC Modules Reference Design

    The objective of TIDA-00560 is to demonstrate a multi-channel LED driver as required in PLC I/O modules to indicate the status of several analog, digital input and output channels. Important requirements for low static current, low component count, minimal PCB requirements and an integrated LED (...)
    User guide: PDF
    Schematic: PDF
    Package Pins CAD symbols, footprints & 3D models
    HTSSOP (PWP) 24 Ultra Librarian
    SSOP (DBQ) 24 Ultra Librarian
    TSSOP (PW) 24 Ultra Librarian
    VQFN (RGE) 24 Ultra Librarian

    Ordering & quality

    Information included:
    • RoHS
    • REACH
    • Device marking
    • Lead finish/Ball material
    • MSL rating/Peak reflow
    • MTBF/FIT estimates
    • Material content
    • Qualification summary
    • Ongoing reliability monitoring
    Information included:
    • Fab location
    • Assembly location

    Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

    Support & training

    TI E2E™ forums with technical support from TI engineers

    Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

    If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

    Videos