データシート
CSD19538Q3A
- 非常に低いQgおよびQgd
- 低い熱抵抗
- アバランシェ定格
- 鉛不使用
- RoHS準拠
- ハロゲン不使用
- SON 3.3mm×3.3mmプラスチック・パッケージ
この100V、49mΩ、SON 3.3mm×3.3mm NexFET™パワーMOSFETは、導電損失を最小限に抑え、PoEアプリケーションの基板占有面積を削減するように設計されています。
お客様が関心を持ちそうな類似品
比較対象デバイスと同等の機能で、ピン配置が異なる製品
技術資料
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
8 をすべて表示 種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | CSD19538Q3A 100V NチャネルNexFET™パワーMOSFET データシート (Rev. A 翻訳版) | PDF | HTML | 英語版 (Rev.A) | PDF | HTML | 2017年 5月 23日 |
アプリケーション・ノート | MOSFET Support and Training Tools (Rev. E) | PDF | HTML | 2024年 5月 13日 | |||
アプリケーション・ノート | Semiconductor and IC Package Thermal Metrics (Rev. D) | PDF | HTML | 2024年 3月 25日 | |||
アプリケーション・ノート | Using MOSFET Transient Thermal Impedance Curves In Your Design | PDF | HTML | 2023年 12月 18日 | |||
アプリケーション・ノート | QFN and SON PCB Attachment (Rev. C) | PDF | HTML | 2023年 12月 6日 | |||
アプリケーション・ノート | Using MOSFET Safe Operating Area Curves in Your Design | PDF | HTML | 2023年 3月 13日 | |||
アプリケーション概要 | Tips for Successfully Paralleling Power MOSFETs | PDF | HTML | 2022年 5月 31日 | |||
アプリケーション・ノート | Ringing Reduction Techniques for NexFET High Performance MOSFETs | 2011年 11月 16日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
サポート・ソフトウェア
Quickly trade off size, cost and performance to select the optimal MOSFET based on application conditions.
サポート・ソフトウェア
NONSYNC-BOOST-FET-LOSS-CALC — NONSYNC BOOST FET LOSS Calculator
MOSFET power loss calculator for non-synchronous boost converter
サポート対象の製品とハードウェア
製品
MOSFET
計算ツール
FET-SOA-CALC-SELECT — MOSFET SOA calculation and selection tool
Excel based FET SOA calculation and selection tool
サポート対象の製品とハードウェア
製品
MOSFET
計算ツール
MOTOR-DRIVE-FET-LOSS-CALC — Power Loss Calculation Tool for BLDC Motor Drive
This is an Excel-based MOSFET power loss calculator for brushless DC motor drive applications.
サポート対象の製品とハードウェア
製品
MOSFET
ソフトウェア
計算ツール
計算ツール
SLPR053 — Power Loss Calculation Tool for Synchronous Inverting Buck Boost Converter
サポート対象の製品とハードウェア
製品
MOSFET
計算ツール
SYNC-BOOST-FET-LOSS-CALC — Power Loss Calculation Tool for Synchronous Boost Converter
MOSFET power loss calculator for synchronous boost converter applications.
サポート対象の製品とハードウェア
製品
MOSFET
計算ツール
SYNC-BUCK-FET-LOSS-CALC — Power Loss Calculation Tool for Synchronous Buck Converter
Quickly trade off size, cost and performance to select the optimal MOSFET based on application conditions.
サポート対象の製品とハードウェア
製品
MOSFET
リファレンス・デザイン
TIDA-010216 — 大容量アプリケーション向け、ローサイド MOSFET 制御機能採用、16S バッテリ・パックのリファレンス・デザイン
このリファレンス・デザインは、スタンバイ・モードとシップ・モードの消費電流が小さく、セル電圧の精度が高い、16S (16 個の直列) リチウムイオン、または LiFePO4 バッテリ・パック向けのデザインです。本デザインは、セル過電圧、セル低電圧、過熱、充電および放電時過電流、放電時短絡の状態にならないように、各セルの電圧、パックの電流、セルと MOSFET の温度を高精度で監視しリチウムイオンおよび LiFePO4 バッテリ・パックを保護します。5 ペアのローサイド N チャネル MOSFET アーキテクチャを、強力なオン / (...)
設計ガイド: PDF
リファレンス・デザイン
PMP20859 — スムーズな遷移を実現する デュアル入力、冗長型 PoE PD のリファレンス・デザイン
This reference design implements an IEEE802.3bt (draft) Power over Ethernet (PoE) Powered Device (PD) with dual redundant inputs and a smooth transition between these inputs and an auxiliary input. The design consists of a 5V/6A synchronous flyback converter and allows for up to three (...)
リファレンス・デザイン
TIDA-01426 — センサ励起向けに低電圧 DC 電圧源からライン AC 電圧を生成するリファレンス・デザイン
This reference design demonstrates a method for designers to achieve high-voltage signals that can be used for flame detection using discrete components. The reference design is built with low BOM-cost and small solution size in mind. By using push-pull converter topology, it is possible to achieve (...)
リファレンス・デザイン
PMP20588 — 完全自律シングル・ポート Type 2(30W)PoE PSE のリファレンス・デザイン
The PMP20588 reference design utilizes the TPS23861 PSE controller to implement a single port Type 2 PoE PSE. An isolated flyback converter, utilizing the LM5022 current mode PWM controller, accepts a 12Vdc/24Vac input and provides a 55Vdc/600mA output source for the PSE. It is ideally (...)
リファレンス・デザイン
TIDA-01227 — 高電圧ステッパ・ドライバのリファレンス・デザイン
The TIDA-01227 reference design is a 15 V to 70 V stepper motor controller for bipolar applications. The design uses Texas Instrument’s DRV8711 Bipolar Stepper Motor Controller gate driver, CSD19538Q3A 100V, N-Channel NexFET Power MOSFET s, CSD17483F4 30V, N-Channel FemtoFET™ (...)
リファレンス・デザイン
PMP20430 — 1A 時 10V ~ 32V 入力、25V 出力、ファクトリ・オートメーション I/O モジュールのリファレンス・デザイン
PMP20430 is a 4-switch buck-boost controller utilizing the LM5175 for industrial applications. This design has a minimum operating input voltage of 10V and a maximum input voltage of 32V, supports 25Vout @ 1A. Switching frequency is set to 600kHz, during buck-boost mode, switching frequency (...)
パッケージ | ピン数 | ダウンロード |
---|---|---|
VSONP (DNH) | 8 | オプションの表示 |
購入と品質
記載されている情報:
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
記載されている情報:
- ファブの拠点
- 組み立てを実施した拠点
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。