Employ SiGe and BAW tech to craft jitter cleaners for high-speed communication, data converter clocking, and timing-sensitive applications

parametric-filterAlle Produkte anzeigen
Achieve superior performance with our selection of clock jitter cleaners, renowned for their minimal phase noise and adherence to JESD204B standards. By employing internal phased-locked loops (PLLs), these devices efficiently reduce phase noise and jitter within your system. Harnessing our advanced bulk acoustic wave (BAW) resonator technology, our products enable seamless fulfillment of demanding system-level requirements in high-speed telecommunication, industrial, and space applications. With user-friendly operation and extensive configurability, our jitter cleaners offer versatility, featuring multiple output options of up to 16 outputs.

Nach Kategorien durchsuchen

Select by function

Jitter cleaners with JESD204 support

Clock high-speed data converters, AFE and FPGA with JESD204

Improve noise performance with integrated BAW VCO

Achieve improved phase-noise performance using our jitter cleaners with integrated bulk-acoustic-wave (BAW) voltage-controlled oscillators (VCOs)

Space and high reliability

Operate in space, harsh and automotive environments with radiation-hardened, extended-temperature and automotive grade devices


 Extrem rauscharmer 3,2-GHz-, JESD204B- und JESD204C-Dual-Loop-Takt-Jitter-Cleaner für die Automobil

Ungefährer Preis (USD) 1ku | 29.99

Learn more about TI clock jitter cleaners and BAW technology

Space products for critical designs

Our radiation-hardened clocking solutions solve clocking requirements for radio-frequency front ends and data processing.

Building on our 60 years of expertise in the space market, our radiation-hardened systems knowledge can help you meet your mission-critical design requirements and achieve space-grade certification faster, from low earth orbit to deep-space missions.

In addition to the traditional radiation-hardened ceramic (QML-V) packages we also offer products in

  • Radiation-hardened plastic (QML-P) packages with SEL ≥65MeV⋅cm2/mg and TID ≥100krad (Si)
  • Radiation-tolerant plastic (space EP) with SEL ≥43MeV⋅cm2/mg and TID ≥30krad (Si)
Visit our space applications portal
Browse applications and choose our products.
All of our space-grade products at your fingertips
View all products with our space parametric selection table.
Technical article
How Space Enhanced Products Address Challenges in low Earth orbit Applications (Rev. A)
Learn how our space-enhanced product qualification process addresses challenges and removes the needfor high-risk and resource-intensive upscreening methods.
Vorgestellte Produkte für Radiation hardened
LMX2615-SP AKTIV Für die Raumfahrt geeigneter Breitbandsynthesizer (40 MHz bis 15 GHz) mit Phasensynchronisierung und
LMK04832-SP AKTIV Garantiert strahlungsfester (RHA), extrem rauscharmer 3,2-GHz-Takt-Jitter-Cleaner mit 15 Ausgängen
Neu LMX1906-SP AKTIV Garantiert strahlungsfester (RHA) 15GHz-Puffer, -Multiplikator und -Teiler mit SYSREF- und FPGA-Takt

High-performance synchronizers and RF synthesizers

Our clocking portfolio spans from clock-distribution solutions to high-performance network synchronizers and RF synthesizers.

  • Supports JESD204B and JESD204C applications by providing phase-synchornized clocking and SYSREF signals to data converters, field-programmable gate arrays and systems-on-a-chip (SoCs) 
  • IEEE 1588v2 Precision Time Protocol (PTP) software provides full timing support with 1pps signal deviation ±2ns that meets Class D performance for ITU-T profiles and partial timing support, less than ±1µs with PDVs in excess of 230µs
User guide
How to Phase Synchronize Multiple LMX2820 Devices
The LMX2820 is one of the RF synthesizers in our product portfolio that can support phase synchronization
Application note
ITU-T G.8262 Compliance Test Results for the LMK5C33216
Application report for ITU-T G.8262 compliance test 
JESD204B and JESD204C reference design
Multi-channel RF transceiver, low-noise clocking reference design for radar and EW applications
Vorgestellte Produkte für IEEE 1588 and PTP
LMK05318B AKTIV Extrem jitterarmer Netzwerk-Synchronisierungstaktgeber mit einem Kanal und BAW
LMK5B33216 AKTIV Netzwerksynchronisierer mit 16 Ausgängen, drei DPLL und APLL, mit integriertem 2,5-GHz-Bulk-Acoustic

Improved jitter performance advantages

BAW technology ultra-low jitter performance meets the stringent clocking requirements of 800Gbps and 1.6TBps Ethernet-based networks and 5G/6G wireless infrastructure applications.

  • Voltage-controlled BAW oscillator (VBCO): Our network synchronizers incorporate BAW technology as a VCO that provide at least a 20dB advantage over traditional LC-tuned VCOs and resulting in clocks with <50fs jitter performance. 
  • BAW reference clock: Our BAW-based oscillators and clock generators provide a clean clocking source to meet the stringent bit error rate requirements for EtherCAT, Serdes, PCIe, and ASIC/FPGA clocking.
Application note
How to use the LMK05318 as a jitter cleaner
This application report outlines two methods of how to clean input jitter with the LMK05318.
Application note
ITU-T G.8262 Compliance Test Results for the LMK5C33216
This application report details compliance of the LMK5C33216 to the ITU-T G.8262 (timing characteristics of a synchronous Ethernet equipment slave clock) standard.
Vorgestellte Produkte für Bulk Acoustic Wave (BAW)
LMK6P AKTIV Jitterarmer Hochleistungs-Bulk-Acoustic-Wave (BAW)-Festfrequenz-LVPECL-Oszillator
LMK5B33216 AKTIV Netzwerksynchronisierer mit 16 Ausgängen, drei DPLL und APLL, mit integriertem 2,5-GHz-Bulk-Acoustic
Neu LMK5C33414A AKTIV Netzwerk-Synchronisierer mit drei DPLL, drei APLL, vier Eingängen und 14 Ausgängen mit JESD204B/C un

Technische Ressourcen

More literature
More literature
Total Ionizing Dose and Single Event Effects Test Results of LMK04832-SP
Learn more about the ELDRS characterization and Single-event effects. Single-event upset (SEU) and Radiation lot acceptance (RLAT) data is also available.
document-pdfAcrobat PDF
White paper
White paper
TI BAW technology enables ultra-low jitter clocks for high-speed networks
Learn how to use the LMK05318 synchronizer with BAW technology to reduce phase noise, and root-mean-square jitter and eliminate the need for a high-frequency low-noise temperature-compensated or oven-controlled crystal oscillator.
document-pdfAcrobat PDF
Application note
Application note
112G and 224G PAM-4 SerDes Clocking for Rapid Data Center Switches
Learn about the advantages of using ultra-high performance clock synchronizers to generate reference clocks needed for high-speed serial links.
document-pdfAcrobat PDF