Stromversorgung für Xilinx-FPGAs
Die FPGA-Produkte von Xilinx sind bahnbrechend auf dem Gebiet der programmierbaren Systemintegration. Aufgrund des vielfältigen Produktangebots stehen nahezu für jeden Systembedarf innovative Lösungen zur Verfügung. Verwenden Sie die Tools unten, um nach der geeigneten Stromversorgungslösung für die folgenden FPGA-Familien zu suchen: Kintex® UltraScale™, Virtex® UltraScale™, Virtex®-7, Kintex®-7, Artix®-7, Spartan®-6, Zynq® Ultrascale+™ MPSoC, Zynq®-7000 Extensible Processing Platform (EPP) und weitere.
Pick a device for each Point-of-Load (POL) power requirement:
| Power Requirements | Sequence #* | Loads** | Solution Options by Regulator Type | ||||
|---|---|---|---|---|---|---|---|
| LDO† | Module | DC/DC Converter | Controller | PMIC | |||
Powered by WEBENCH® Power Designer
WEBENCH Power Designer suggests devices that meet the basic supply voltage and current requirements of the FPGA. Before picking devices for your design, refer to the FPGA datasheet for more detailed power supply requirements that must be met, such as voltage tolerances, power-up/down sequencing, AVS/DVS, and ramp times.
- TMP461 (Temperature sensor)
** Loads are grouped by output voltage and sequencing order.
† Linear LDO regulators dissipate power proportional to the voltage drop from input to output. Reduce LDO voltage drop and power dissipation by powering LDOs from an intermediate rail voltage that is closer to the LDO output voltage.