SBAS925A August 2018 – November 2018 ADS1119
The device has two 8-bit registers (configuration and status) that are accessible through the I2C interface using the RREG and WREG commands. After power-up or reset, both registers are set to the default values (which are all 0). All register values are retained during power-down mode. Table 8 shows the register map of the two registers.
|REGISTER (Hex)||BIT 7||BIT 6||BIT 5||BIT 4||BIT 3||BIT 2||BIT 1||BIT 0|