Once a device is programmed to operate in one of the modes, the user may want to continue operating in the same mode. Mode Control Register settings to continue operating in a selected mode are detailed in Table 7.
|BITS||RESET STATE||LOGIC STATE||FUNCTION|
|DI15-12||0001||0000||The device continues to operate in the selected mode. In Auto-1 and Auto-2 modes the channel counter increments normally, whereas in the Manual mode it continues with the last selected channel. The device ignores data on DI11-DI00 and continues operating as per the previous settings. This feature is provided so that SDI can be held low when no changes are required in the Mode Control Register settings.|
|DI11-00||All '0'||Device ignores these bits when DI15-12 is set to 0000 logic state|