SLUSDU0 September 2019 BQ21061
Return to Summary Table.
|7-6||MR_LPRESS_ACTION_1:0||R/W||2b00|| MR Long Press Action
2b00 = HW Reset (Power Cycle)
2b01 = Do nothing
2b10 = Enter Ship Mode
2b11 = Enter Ship Mode
|3-2||PG_MODE_1:0||R/W||2b00||PG Pin Mode of Operation
2b00 = VIN Power Good. PG pulls to GND when VIN > VUVLO, VIN > VBAT+VSLP and VIN < VIN_OVP.
2b01 = Deglitched Level Shifted /MR. PG is high impedance when the MR input is high, and PG pulls to GND when the MR input is low.
2b1x = General Purpose Open Drain Output. The state of the PG pin is then controlled through the GPO_PG bit, where if GPO_PG is 0 , the PG pin is pulled to GND and if it is 1, the PG pin is in high impedance.
|1-0||PMID_MODE_1:0||R/W||2b00|| PMID Control
Sets how PMID is powered in any state, except Ship Mode.
2b00 = PMID powered from BAT or VIN if present
2b01 = PMID powered from BAT only, even if VIN is present
2b10 = PMID disconnected and left floating
2b11 = PMID disconnected and pulled down.