SLUSB20C November 2012 – November 2021
Extended commands offer additional functionality beyond the standard set of commands. They are used in the same manner; however, unlike standard commands, extended commands are not limited to 2-byte words. The number of command bytes for a given extended command range in size from single to multiple bytes is specified in Table 8-2. See BQ27520-G4 Technical Reference Manual (SLUUA35) for details on accessing the data flash.
|Reserved||0x34 to 0x3D||NA||R||R|
|DataFlashClass( ) (2)||0x3E||NA||NA||RW|
|DataFlashBlock( ) (2)||0x3F||NA||RW||RW|
|BlockData( )||0x40 to 0x5F||NA||R||RW|
|Reserved||0x6B to 0x7F||NA||R||R|