DLPS253B September   2024  – August 2025 DLPC8445 , DLPC8455

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
    1.     6
    2. 4.1  Initialization, Board Level Test, and Debug
    3. 4.2  V-by-One Interface Input Data and Control
    4. 4.3  FPD Link Port(s) Input Data and Control (Not Supported in DLPC8445, DLPC8445V, and DLPC8455)
    5. 4.4  DSI Input Data and Clock (Not Supported in DLPC8445, DLPC8445V, and DLPC8455)
    6. 4.5  DMD SubLVDS Interface
    7. 4.6  DMD Reset and Low-Speed Interfaces
    8. 4.7  Flash Interface
    9. 4.8  Peripheral Interfaces
    10. 4.9  GPIO Peripheral Interface
    11. 4.10 Clock and PLL Support
    12. 4.11 Power and Ground
    13. 4.12 I/O Type Subscript Definition
    14. 4.13 Internal Pullup and Pulldown Characteristics
  6. 5 Specifications
    1. 5.1  Absolute Maximum Ratings
    2.     22
    3. 5.2  ESD Ratings
    4. 5.3  Recommended Operating Conditions
    5. 5.4  Thermal Information
    6. 5.5  Power Electrical Characteristics
    7. 5.6  Pin Electrical Characteristics
    8. 5.7  DMD SubLVDS Interface Electrical Characteristics
    9.     29
    10. 5.8  DMD Low-Speed Interface Electrical Characteristics
    11.     31
    12. 5.9  V-by-One Interface Electrical Characteristics
    13. 5.10 USB Electrical Characteristics
    14.     34
    15. 5.11 System Oscillator Timing Requirements
    16.     36
    17. 5.12 Power Supply and Reset Timing Requirements
    18.     38
    19. 5.13 V-by-One Interface General Timing Requirements
    20.     40
    21. 5.14 Flash Interface Timing Requirements
    22.     42
    23. 5.15 Source Frame Timing Requirements
    24.     44
    25. 5.16 Synchronous Serial Port Interface Timing Requirements
    26.     46
    27. 5.17 I2C Interface Timing Requirements
    28. 5.18 Programmable Output Clock Timing Requirements
    29. 5.19 JTAG Boundary Scan Interface Timing Requirements (Debug Only)
    30.     50
    31. 5.20 DMD Low-Speed Interface Timing Requirements
    32.     52
    33. 5.21 DMD SubLVDS Interface Timing Requirements
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagrams
    3. 6.3 Feature Description
      1. 6.3.1 Input Sources
      2. 6.3.2 V-by-One Interface
      3. 6.3.3 DMD (SubLVDS) Interface
      4. 6.3.4 Serial Flash Interface
      5. 6.3.5 GPIO Supported Functionality
        1.       63
        2.       64
      6. 6.3.6 Debug Support
  8. 7 Power Supply Recommendations
    1. 7.1 System Power-Up and Power-Down Sequence
    2. 7.2 DMD Fast Park Control (PARKZ)
    3. 7.3 Power Supply Management
    4. 7.4 Hotplug Usage
    5. 7.5 Power Supplies for Unused Input Source Interfaces
    6. 7.6 Power Supplies
      1. 7.6.1 Power Supplies DLPA3085 or DLPA3082
  9. 8 Layout
    1. 8.1 Layout Guidelines
      1. 8.1.1 Layout Guideline for DLPC8445, DLPC8445V, or DLPC8455 Reference Clock
        1. 8.1.1.1 Recommended Crystal Oscillator Configuration
      2. 8.1.2 V-by-One Interface Layout Considerations
      3. 8.1.3 DMD Maximum Pin-to-Pin, PCB Interconnects Etch Lengths
      4. 8.1.4 Power Supply Layout Guidelines
    2. 8.2 Thermal Considerations
  10. 9 Device and Documentation Support
    1. 9.1 Third-Party Products Disclaimer
    2. 9.2 Documentation Support
      1. 9.2.1 Related Documentation
    3. 9.3 Receiving Notification of Documentation Updates
    4. 9.4 Support Resources
    5. 9.5 Device Nomenclature
      1. 9.5.1 Device Markings
    6. 9.6 Trademarks
    7. 9.7 Electrostatic Discharge Caution
    8. 9.8 Glossary
      1. 9.8.1 Video Timing Parameter Definitions
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

8.1.2 V-by-One Interface Layout Considerations

The DLPC8445, DLPC8445V, and DLPC8455 V-by-One SERDES differential interface waveform quality and timing are dependent on the total length of the interconnect system, the spacing between traces, the characteristic impedance, etch losses, and how well matched the lengths are across the interface. Thus, ensuring a positive timing margin requires attention to many factors.

DLPC8445, DLPC8445V, and DLPC8455 I/O timing parameters, V-by-One transmitter timing parameters, as well as Thine specific timing requirements, can be found in the corresponding transmitter data sheets. PCB routing mismatch can be budgeted and met through controlled PCB routing. PCB-related requirements for V-by-One are provided in V-by-One Interface PBC Related Requirements as a starting point for the customer.

Table 8-4 V-by-One Interface PBC Related Requirements
PARAMETER(1)MINTYPMAXUNIT
Intralane cross-talk
(between VX1_DATAx_P and VX1_DATAx_N)		< 1.5mVpp
Interlane cross-talk
(between data lane pairs)		< 1.5mVpp
Cross-talk between data lanes and other signals< 1.5mVpp
Intralane skew< 40ps
Inter-lane skew< 800ps
Differential Impedance90100110Ω
(1) If using the minimum trace width and spacing to escape the controller ball field, widening these out after escape is desirable if practical to achieve the target 100Ω impedance (for example, to reduce transmission line losses).

Additional V-by-One layout guidelines:

  • Route the differential signal pairs on the top layer of the PBC to minimize the number of vias. Limit the number of necessary vias to two.
  • Route differential signal pairs over a single ground or power plane using a microstrip line configuration. Ground guard traces are also recommended.
  • Do not route the differential signal pairs over the slit of power or ground planes.
  • Minimize the trace length mismatch for each pair and between each pair to meet the skew requirements.
  • Ensure that the bend angles associated with the differential signal pairs are between 135° and 225° (see Figure 8-3).

DLPC8445 DLPC8445V DLPC8455 V-by-One Routing ExampleFigure 8-3 V-by-One Routing Example