SNLS589B September 2016 – July 2018 DS90UB960-Q1
RX port specific register. The FPD-Link III Port Select register 0x4C configures which unique Rx port registers can be accessed by I2C read and write commands.
Recommend to set bit four in the FPD-Link III capabilities register to one in order to flag errors detected from enhanced CRC on encoded link control information. The FPD-Link III Encoder CRC must also be enabled by setting the FPD3_ENC_CRC_DIS (register 0xBA) to 0.
|R/W||0||0: Disable CRC error flag from FPD-Link III encoder
1: Disable CRC error flag from FPD-Link III encoder (recommended)