SNLS589B September 2016 – July 2018 DS90UB960-Q1
RX port specific register. The FPD-Link III Port Select register 0x4C configures which unique Rx port registers can be accessed by I2C read and write commands.
|2||IE_FPD3_ENC_ERR||R/W||0||Interrupt on FPD-Link III Receiver Encoding Error
When enabled, an interrupt is generated on detection of an encoding error on the FPD-Link III interface for the receive port as reported in the FPD3_ENC_ERROR bit in the RX_PORT_STS2 register
|1||IE_BCC_SEQ_ERR||R/W||0||Interrupt on BCC SEQ Sequence Error When enabled, an interrupt is generated if a Sequence Error is detected for the Bi-directional Control Channel forward channel receiver as reported in the BCC_SEQ_ERROR bit in the RX_PORT_STS1 register.|
|0||IE_BCC_CRC_ERR||R/W||0||Interrupt on BCC CRC error detect
When enabled, an interrupt is generated if a CRC error is detected on a Bi-directional Control Channel frame received over the FPD-Link III forward channel as reported in the BCC_CRC_ERROR bit in the RX_PORT_STS1 register.