SNLS589B September 2016 – July 2018 DS90UB960-Q1
RX port specific register. The FPD-Link III Port Select register 0x4C configures which unique Rx port registers can be accessed by I2C read and write commands.
|7:0||SEN_INT_RISE||R/RC||0x00||Sensor Interrupt Rise Status
This register provides the interrupt status for rising edge transitions on the bits in SENSOR_STS_0. If a mask bit is set in the SEN_INT_RISE_MASK register, a rising edge transition on the corresponding SENSOR_STS_0 bit will generate an interrupt that will be latched in this register.