SLOS068X June   1976  – June 2020 LM158 , LM158A , LM258 , LM258A , LM2904 , LM2904B , LM2904BA , LM2904V , LM358 , LM358A , LM358B , LM358BA

UNLESS OTHERWISE NOTED, this document contains PRODUCTION DATA.  

  1. Features
  2. Applications
    1.     Single-Pole, Low-Pass Filter
  3. Description
    1.     Device Images
  4. Revision History
  5. Device Comparison Table
  6. Pin Configuration and Functions
    1.     Pin Functions
  7. Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  Thermal Information
    5. 7.5  Electrical Characteristics: LM358B and LM358BA
    6. 7.6  Electrical Characteristics: LM2904B and LM2904BA
    7. 7.7  Electrical Characteristics: LM358, LM358A
    8. 7.8  Electrical Characteristics: LM2904, LM2904V
    9. 7.9  Electrical Characteristics: LM158, LM158A
    10. 7.10 Electrical Characteristics: LM258, LM258A
    11. 7.11 Typical Characteristics
    12. 7.12 Typical Characteristics
  8. Parameter Measurement Information
  9. Detailed Description
    1. 9.1 Overview
    2. 9.2 Functional Block Diagram - LM358B, LM358BA, LM2904B, LM2904BA
    3. 9.3 Feature Description
      1. 9.3.1 Unity-Gain Bandwidth
      2. 9.3.2 Slew Rate
      3. 9.3.3 Input Common Mode Range
    4. 9.4 Device Functional Modes
  10. 10Application and Implementation
    1. 10.1 Application Information
    2. 10.2 Typical Application
      1. 10.2.1 Design Requirements
      2. 10.2.2 Detailed Design Procedure
      3. 10.2.3 Application Curve
  11. 11Power Supply Recommendations
  12. 12Layout
    1. 12.1 Layout Guidelines
    2. 12.2 Layout Examples
  13. 13Device and Documentation Support
    1. 13.1 Documentation Support
      1. 13.1.1 Related Documentation
    2. 13.2 Related Links
    3. 13.3 Receiving Notification of Documentation Updates
    4. 13.4 Support Resources
    5. 13.5 Trademarks
    6. 13.6 Electrostatic Discharge Caution
    7. 13.7 Glossary
  14. 14Mechanical, Packaging, and Orderable Information

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)
  • D|8
  • P|8
  • DGK|8
  • PS|8
  • PW|8
Thermal pad, mechanical data (Package|Pins)
Orderable Information

Electrical Characteristics: LM158, LM158A

For VS = (V+) – (V–) = 5 V, TA = 25 °C, (unless otherwise noted)
PARAMETER TEST CONDITIONS(1) MIN TYP(2) MAX UNIT
OFFSET VOLTAGE
VOS Input offset voltage VS = 5 V to 30 V; VCM = 0 V; VO = 1.4 V LM158 3 5 mV
TA = –55°C to 125°C 7
LM158A 2
TA = –55°C to 125°C 4
dVOS/dT Input offset voltage drift LM158 TA = –55°C to 125°C 7 µV/°C
LM158A TA = –55°C to 125°C 7 15(3)
PSRR Input offset voltage vs power supply (ΔVIO/ΔVS) VS = 5 V to 30 V 65 100 dB
VO1/ VO2 Channel separation f = 1 kHz to 20 kHz 120 dB
INPUT VOLTAGE RANGE
VCM Common-mode voltage range VS = 5 V to 30 V LM158 (V–) (V+) – 1.5 V
VS = 30 V LM158A
VS = 5 V to 30 V LM158 TA = –55°C to 125°C (V–) (V+) – 2
VS = 30 V LM158A
CMRR Common-mode rejection ratio VS = 5 V to 30 V; VCM = 0 V 70 80 dB
INPUT BIAS CURRENT
IB Input bias current VO = 1.4 V LM158 –20 –150 nA
TA = –55°C to 125°C –300
LM158A –15 –50
TA = –55°C to 125°C –100
IOS Input offset current VO = 1.4 V LM158 2 30 nA
TA = –55°C to 125°C 100
LM158A 2 10
TA = –55°C to 125°C 30
dIOS/dT Input offset current drift 10 pA/°C
LM158A TA = –55°C to 125°C 200
NOISE
en Input voltage noise density f = 1 kHz 40 nV/√Hz
OPEN-LOOP GAIN
AOL Open-loop voltage gain VS = 15 V; VO = 1 V to 11 V; RL ≥ 2 kΩ 50 100 V/mV
TA = –55°C to 125°C 25
FREQUENCY RESPONSE
GBW Gain bandwidth product 0.7 MHz
SR Slew rate G = +1 0.3 V/µs
OUTPUT
VO Voltage output swing from rail Positive rail VS = 30 V; RL = 2 kΩ TA = –55°C to 125°C 4 V
VS = 30 V; RL ≥ 10 kΩ 2 3
VS = 5 V; RL ≥ 2 kΩ 1.5
Negative rail VS = 5 V; RL ≤ 10 kΩ TA = –55°C to 125°C 5 20 mV
IO Output current VS = 15 V; VO = 0 V; VID = 1 V Source –20 –30 mA
LM158A –60
TA = –55°C to 125°C –10
VS = 15 V; VO = 15 V; VID = –1 V Sink 10 20
TA = –55°C to 125°C 5
VID = –1 V; VO = 200 mV 12 30 µA
ISC Short-circuit current VS = 10 V; VO = VS / 2 ±40 ±60 mA
POWER SUPPLY
IQ Quiescent current per amplifier VO = 2.5 V; IO = 0 A TA = –55°C to 125°C 350 600 µA
VS = 30 V; VO = 15 V; IO = 0 A 500 1000
All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. Maximum VS for testing purposes is 30 V for LM158 and LM158A.
All typical values are TA = 25°C.
On products compliant to MIL-PRF-38535, this parameter is not production tested.