SLLSFH8A August 2021 – December 2021 MCT8316A
In the case of latched faults, the device goes into a partial shutdown state to help protect the power MOSFETs and system. When the fault condition clears, the device can go to the operating state again by setting the CLR_FLT to 1b.
|SPEED COMMAND MODE||ENTER STANDBY CONDITION||ENTER SLEEP CONDITION||EXIT FROM STANDBY CONDITION||EXIT FROM SLEEP CONDITION|
|Analog||SPEED pin voltage < VEN_SB for tDET_SB_ANA||SPEED pin voltage < VEN_SL for tDET_SL_ANA||SPEED pin voltage > VEX_SB for tDET_ANA||SPEED pin voltage > VEX_SL for tDET_ANA|
|PWM/ Frequency||SPEED pin low (V < VDIG_IL) for tEN_SB_PWM/ tEN_SB_FREQ||SPEED pin low (V < VDIG_IL) for tDET_SL_PWM/ tDET_SL_FREQ||SPEED pin high (V > VDIG_IH) for tDET_PWM||SPEED pin high (V > VDIG_IH) for tDET_PWM|
|I2C||SPEED_CTRL is programmed as 0.||SPEED pin voltage < VEN_SL for t > SLEEP_TIME||SPEED_CTRL is programmed as non-zero.||SPEED pin voltage > VEX_SL for tDET_ANA|