The MSP family supports the standard JTAG interface, which requires four signals for sending and receiving data. The JTAG signals are shared with general-purpose I/O. The TEST/SBWTCK pin is used to enable the JTAG signals. In addition to these signals, the RST/NMI/SBWTDIO is required to interface with MSP development tools and device programmers. Table 9-7 lists the JTAG pin requirements. For further details on interfacing to development tools and device programmers, see the MSP430 Hardware Tools User's Guide. For a complete description of the features of the JTAG interface and its implementation, see MSP430 Programming With the JTAG Interface.
|PJ.3/TCK||IN||JTAG clock input|
|PJ.2/TMS||IN||JTAG state control|
|PJ.1/TDI/TCLK||IN||JTAG data input, TCLK input|
|PJ.0/TDO||OUT||JTAG data output|
|TEST/SBWTCK||IN||Enable JTAG pins|