OPA1632 datasheet

SBOS286D December 2003 – March 2022 OPA1632

PRODUCTION DATA

Package Options

Mechanical Data (Package|Pins)

D|8
- MSOI002K
DGN|8
- MPDS046F

Thermal pad, mechanical data (Package|Pins)

DGN|8
- PPTD041I

Orderable Information

6.6 Electrical Characteristics: OPA1632DGN

V_S = ±15 V; R_F = 390 Ω, R_L = 800 Ω, and G = +1 (unless otherwise noted)

PARAMETER			TEST CONDITIONS		MIN	TYP	MAX	UNIT
Offset Voltage
Input Offset Voltage						±0.5	±3	mV
	vs Power Supply, dc	dV_OS/dT				±5		μV°C
	vs Power Supply, dc	PSRR			316	13		μV/V
Input Bias Current
Input Bias Current	I_B					2	6	μA
Input Offset Current	I_OS					±100	±500	nA
Noise
Input Voltage Noise			f = 10 kHz			1.3		nV/√Hz
Input Current Noise			f = 10 kHz			0.4		pA/√Hz
Input Voltage
Common-Mode Input Range					(V−) + 1.5		(V+) − 1	V
Common-Mode Rejection Ratio, dc					74	90		dB
Input Impedance
Input Impedance (each input pin)						34 \|\| 4		MΩ \|\| pF
Open-Loop Gain
Open-Loop Gain, dc					66	78		dB
Frequency Response
Small-Signal Bandwidth			G = +1, R_F= 348 Ω			180		MHz
	(V_O = 100mV_PP, Peaking < 0.5 dB)		G = +2, R_F = 602 Ω			90		MHz
			G = +5, R_F = 1.5 kΩ			36		MHz
			G = +10, R_F = 3.01 kΩ			18		MHz
Bandwidth for 0.1dB Flatness			G = +1, V_O = 100 mV_PP			40		MHz
Peaking at a Gain of 1			V_O = 100 mV_PP			0.5		dB
Large-Signal Bandwidth			G = +2, V_O = 20 V_PP			800		kHz
Slew Rate (25% to 75% )			G = +1			50		V/μs
Rise and Fall Time			G = +1, V_O = 5-V Step			100		ns
Settling Time to	0.1%		G = +1, V_O = 2-V Step			75		ns
Settling Time to	0.01%		G = +1, V_O = 2-V Step			200		ns
Total Harmonic Distortion + Noise	Differential Input/Output		G = +1, f = 1 kHz, V_O = 3 V_RMS	R_L = 600 Ω		0.0003%
	Differential Input/Output			R_L = 2 kΩ		0.000022%
	Single-Ended In/Differential Out			R_L = 600 Ω		0.000059%
	Single-Ended In/Differential Out			R_L = 2 kΩ		0.000043%
Intermodulation Distortion	Differential Input/Output		G = +1, SMPTE/DIN, V_O = 2 V_PP	R_L = 600 Ω		0.00008%
	Differential Input/Output			R_L = 2 kΩ		0.00005%
	Single-Ended In/Differential Out			R_L = 600 Ω		0.0001%
	Single-Ended In/Differential Out			R_L = 2 kΩ		0.0007%
Headroom			THD < 0.01%, R_L = 2 kΩ			20.0		V_PP
Output
Voltage Output Swing			R_L = 2 kΩ		(V+) − 1.9		(V−) + 1.9	V
Voltage Output Swing			R_L = 800 Ω		(V+) − 4.5		(V−) + 4.5	V
Short-Circuit Current	I_SC		Sourcing		+50	85		mA
Short-Circuit Current	I_SC		Sinking		−60	-85		mA
Closed-Loop Output Impedance			G = +1, f = 100 kHz			0.3		Ω
Power-Down⁽¹⁾
Enable Voltage Threshold						(V−) + 2		V
Disable Voltage Threshold						(V−) + 0.8		V
Shutdown Current			V_ENABLE = −15 V			1.7		mA
Shutdown Current			V_S = ±5 V, V_ENABLE = −5 V			0.85		mA
Turn-On Delay			Time for I_Q to Reach 50%			2		μs
Turn-Off Delay			Time for I_Q to Reach 50%			2		μs
Power Supply
Specified Operating Voltage							±15	V
Operating Voltage					±2.5			V
Quiescent Current	I_Q		Per Channel			14	17.1	mA
Temperature Range
Specified Range					–40		+85	°C
Operating Range					–40		+125	°C
Storage Range					–65		+150	°C

(1) Amplifier has internal 50-kΩ pull-up resistor to V+ pin. This enables the amplifier with no connection to shutdown pin.