This register is the device status value register 1.
|7-5||MODE_STS[2:0]||R||4h||Device mode status.
4d = Device is in sleep mode or software shutdown mode
6d = Device is in active mode with all ADC channels turned off
7d = Device is in active mode with at least one ADC channel turned on
|4||BOOST_STS||R||0h||Boost power up status.
0d = Boost is powered down
1d = Boost is powered up
|3||MBIAS_STS||R||0h||MICBIAS power up status.
0d = MICBIAS is powered down
1d = MICBIAS is powered up
|2||CHx_PD_FLT_STS||R||0h||ADC channel power down status caused by INxx inputs faults.
0d = No ADC channel is powered down caused by INxx inputs faults
1d = Atleast a ADC channel is powered down caused by INxx inputs faults
|1||ALL_CHx_PD_FLT_STS||R||0h||ADC channel power down status caused by MICBIAS faults.
0d = No ADC channel is powered down caused by MICBIAS faults
1d = All ADC channels are powered down caused by MICBIAS faults
|0||MAN_RCV_PD_FLT_CHK||RW||0h||Manual recovery (self-clearing bit).
0d = No effect
1d = Recheck all fault status and re-powerup ADC channels and/or MICBIAS if they do not have any faults. Before setting this bit, reset P0_R58 register and re-configure P0_R58 to desired setting only after manual recover gets over.