This register is the power-up configuration register.
|7||MICBIAS_PDZ||RW||0h||Power control for MICBIAS.
0d = Power down MICBIAS
1d = Power up MICBIAS
|6||ADC_PDZ||RW||0h||Power control for ADC channels.
0d = Power down all ADC channels
1d = Power up all enabled ADC channels
|5||PLL_PDZ||RW||0h||Power control for the PLL.
0d = Power down the PLL
1d = Power up the PLL
|4||DYN_CH_PUPD_EN||RW||0h||Dynamic channel power-up, power-down enable.
0d = Channel power-up, power-down is not supported if any channel recording is on
1d = Channel can be powered up or down individually, even if channel recording is on. Do not powered-down channel 1 if this bit is set to '1'
|3-2||DYN_MAXCH_SEL[1:0]||RW||0h||Dynamic mode maximum channel select configuration.
0d = Channel 1 and channel 2 are used with dynamic channel power-up, power-down feature enabled
1d = Channel 1 to channel 4 are used with dynamic channel power-up, power-down feature enabled
2d = Channel 1 to channel 6 are used with dynamic channel power-up, power-down feature enabled