SLLSFO0 December   2021 TCAN1057AEV-Q1

PRODUCTION DATA  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 ESD Ratings Table — IEC Specifications
    4. 6.4 Recommended Operating Conditions
    5. 6.5 Thermal Characteristics
    6. 6.6 Supply Characteristics
    7. 6.7 Dissipation Ratings
    8. 6.8 Electrical Characteristics
    9. 6.9 Switching Characteristics
  7. 7 Parameter Measurement Information
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Pin Description
        1. 8.3.1.1 TXD
        2. 8.3.1.2 GND
        3. 8.3.1.3 VCC
        4. 8.3.1.4 RXD
        5. 8.3.1.5 VIO
        6. 8.3.1.6 CANH and CANL
        7. 8.3.1.7 S (Silent)
      2. 8.3.2 CAN Bus States
      3. 8.3.3 TXD Dominant Timeout (DTO)
      4. 8.3.4 CAN Bus Short-Circuit Current Limiting
      5. 8.3.5 Thermal Shutdown (TSD)
      6. 8.3.6 Undervoltage Lockout
      7. 8.3.7 Unpowered Device
      8. 8.3.8 Floating Pins
    4. 8.4 Device Functional Modes
      1. 8.4.1 Operating Modes
      2. 8.4.2 Normal Mode
      3. 8.4.3 Silent Mode
      4. 8.4.4 Driver and Receiver Function
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
        1. 9.2.1.1 CAN Termination
      2. 9.2.2 Detailed Design Procedures
        1. 9.2.2.1 Bus Loading, Length and Number of Nodes
      3. 9.2.3 Application Curves
      4. 9.2.4 System Examples
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Documentation Support
    2. 12.2 Receiving Notification of Documentation Updates
    3. 12.3 Support Resources
    4. 12.4 Trademarks
    5. 12.5 Electrostatic Discharge Caution
    6. 12.6 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

6.8 Electrical Characteristics

Over recommended operating conditions with TA = -40℃ to 150℃ (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Driver Electrical Characteristics
VO(DOM) Dominant output voltage
Normal mode		 CANH S = 0 V, TXD = 0 V
50 Ω ≤ RL ≤ 65 Ω, CL = open, RCM = open;
See Figure 7-2		 2.75 4.5 V
CANL 0.5 2.25 V
VO(REC) Recessive output voltage
Normal or silent mode		 CANH and CANL S = 0 V, TXD = VIO
RL = open (no load), RCM = open
See Figure 7-2		 2 0.5 VCC 3 V
VSYM Driver symmetry
(VO(CANH) + VO(CANL))/VCC		 S = 0 V, TXD = 250 kHz, 1 MHz, 2.5 MHz
RL = 60 Ω, CSPLIT = 4.7 nF, CL = open, RCM = open;
See Figure 7-2 and Figure 9-2		 0.9 1.1 V/V
VSYM_DC DC output symmetry
(VCC - VO(CANH) - VO(CANL))		 S = 0 V
RL = 60 Ω, CL = open;
See Figure 7-2		 –400 400 mV
VOD(DOM) Differential output voltage Normal mode
Dominant		 CANH - CANL S = 0 V, TXD = 0 V
50 Ω ≤ RL ≤ 65 Ω, CL = open;
See Figure 7-2		 1.5 3 V
S = 0 V, TXD = 0 V
45 Ω ≤ RL ≤ 70 Ω, CL = open;
See Figure 7-2		 1.4 3.3 V
S = 0 V, TXD = 0 V
RL = 2240 Ω, CL = open;
See Figure 7-2		 1.5 5 V
VOD(REC) Differential output voltage Normal mode
Recessive		 CANH - CANL S = 0 V, TXD = VIO
RL = 60 Ω, CL = open;
See Figure 7-2		 –120 12 mV
S = 0 V, TXD = VIO
RL = open, CL = open;
See Figure 7-2		 –50 50 mV
IOS(SS_DOM) Short-circuit steady-state output current, dominant
Normal mode		 S = 0 V, TXD = 0 V
V(CANH) = -15 V to 40 V, CANL = open;
See Figure 7-7		 –115 mA
S = 0 V, TXD = 0 V
V(CAN_L) = -15 V to 40 V, CANH = open;
See Figure 7-7		 115 mA
IOS(SS_REC) Short-circuit steady-state output current, recessive
Normal mode		 S = 0 V, TXD = VIO
–27 V ≤ VBUS ≤ 32 V, where VBUS = CANH = CANL;
See Figure 7-7		 –5 5 mA
Receiver Electrical Characteristics
VIT Input threshold voltage
Normal and silent mode		 S = 0 V, -12 V ≤ VCM ≤ 12 V;
See Figure 7-3 and Table 8-5		 500 900 mV
VDOM Dominant state differential input voltage range
Normal and silent mode		 S = 0 V, -12 V ≤ VCM ≤ 12 V;
See Figure 7-3 and Table 8-5		 0.9 9 V
VREC Recessive state differential input voltage range
Normal and silent mode		 S = 0 V, -12 V ≤ VCM ≤ 12 V;
See Figure 7-3 and Table 8-5		 -4 0.5 V
VHYS Hysteresis voltage for input threshold
Normal mode		 S = 0 V, -12 V ≤ VCM ≤ 12 V;
See Figure 7-3 and Table 8-5		 115 mV
VCM Common-mode range
Normal and silent mode		 See Figure 7-3 and Table 8-5 –12 12 V
ILKG(IOFF) Unpowered bus input leakage current CANH = CANL = 5 V, VCC = VIO = GND 5 µA
CI Input capacitance to ground (CANH or CANL) TXD = VIO 20 pF
CID Differential input capacitance 10 pF
RID Differential input resistance TXD = VIO, S = 0 V, -12 V ≤ VCM ≤ 12 V 40 90 kΩ
RIN Single-ended input resistance
(CANH or CANL)		 20 45 kΩ
RIN(M) Input resistance matching
[1 – (RIN(CANH) / RIN(CANL))] × 100 %		 V(CAN_H) = V(CAN_L) = 5 V –1 1 %
TXD Terminal (CAN Transmit Data Input)
VIH High-level input voltage 0.7 VIO V
VIL Low-level input voltage 0.3 VIO V
IIH High-level input leakage current TXD = VCC = VIO = 5.5 V –2.5 0 1 µA
IIL Low-level input leakage current TXD = 0 V
VCC= VIO = 5.5 V		 –200 -100 –20 µA
ILKG(OFF) Unpowered leakage current TXD = 5.5 V
VCC= VIO = 0 V		 –1 0 1 µA
CI Input capacitance VIN = 0.4×sin(2×π×2×106×t)+2.5 V 5 pF
RXD Terminal (CAN Receive Data Output)
VOH High-level output voltage IO = –1.5 mA
See Figure 7-3		 0.8 VIO   V
VOL Low-level output voltage IO = 1.5mA
See Figure 7-3		   0.2 VIO V
ILKG(OFF) Unpowered leakage current RXD = 5.5 V
VCC = VIO = 0 V		 –1 0 1 µA
S Terminal (Silent Mode Input)
VIH High-level input voltage 0.7 VIO V
VIL Low-level input voltage 0.3 VIO V
IIH High-level input leakage current VCC = VIO = S = 5.5 V –2 2 µA
IIL Low-level input leakage current S = 0 V
VCC = VIO = 5.5 V,		 –20 –2 µA
ILKG(OFF) Unpowered leakage current S = 5.5V
VCC = VIO = 0 V		 –1 0 1 µA