SLIS187 June 2021 TLC6A598
Refer to the PDF data sheet for device specific package drawings
Figure 9-3 shows a typical application circuit with TLC6A598 to drive Relays. The MCU generates all the input signals.
Please note that inductive loads, such as stepper motors or relays, can generate negative transients on the DRAINx pins of the device. Typically this occurs when the output channel FET turns ON, pulling the DRAINx node to ground. This can cause the DRAINx node to go below the voltage rating listed in the Absolute Maximum Ratings table, which in effect causes excessive ground current leakage.