SBOS779D June 2016 – May 2017 TLV6001 , TLV6002 , TLV6004
The TLV600x family of single-, dual-, and quad-channel operational amplifiers is specifically designed for general-purpose applications. Featuring rail-to-rail input and output (RRIO) swings, low quiescent current (75 μA, typical), wide bandwidth (1 MHz) and low noise (28 nV/√Hz at 1 kHz), this family is attractive for a variety of applications that require a good balance between cost and performance, such as consumer electronics, smoke detectors, and white goods. The low-input-bias current (±1.0 pA, typical) enables the TLV600x to be used in applications with megaohm source impedances.
The robust design of the TLV600x provides ease-of-use to the circuit designer: unity-gain stability with capacitive loads of up to 150 pF, integrated RF/EMI rejection filter, no phase reversal in overdrive conditions, and high electrostatic discharge (ESD) protection (4-kV HBM).
The devices are optimized for operation at voltages as low as 1.8 V (±0.9 V) and up to 5.5 V (±2.75 V), and are specified over the extended temperature range of –40°C to +125°C.
The single-channel TLV6001 is available in SC70-5 and SOT23-5 packages. The dual-channel TLV6002 is offered in SOIC-8 and VSSOP-8 packages, and the quad-channel TLV6004 is offered in a TSSOP-14 package.
|PART NUMBER||PACKAGE||BODY SIZE (NOM)|
|TLV6001||SC70 (5)||2.00 mm × 1.25 mm|
|SOT-23 (5)||2.90 mm × 1.60 mm|
|TLV6002||SOIC (8)||4.90 mm × 3.91 mm|
|VSSOP (8)||3.00 mm × 3.00 mm|
|TLV6004||TSSOP (14)||5.00 mm × 4.40 mm|
Changes from C Revision (December 2016) to D Revision
Changes from B Revision (October 2016) to C Revision
Changes from A Revision (July 2016) to B Revision
Changes from * Revision (June 2016) to A Revision