SBOS740A May 2017 – May 2019 TMP116
|15||EUN||R/W||0|| EEPROM unlock.
0: EEPROM is locked for programming: writes to all EEPROM addresses (such as configuration, limits, and EEPROM locations 1-4) are written to registers in digital logic and are not programmed in the EEPROM
1: EEPROM unlocked for programming: any writes to writable registers program the respective location in the EEPROM
|14||EEPROM_Busy||R||0||EEPROM busy. This flag is the mirror of the EEPROM busy flag (bit 12) in the configuration register.
0: Indicates that the EEPROM is ready, which means that the EEPROM has finished the last transaction and is ready to accept new commands
1: Indicates that the EEPROM is busy, which means that the EEPROM is currently completing a programming operation or performing power-up on reset load