SLVS228D August   1999  – December 2020

PRODUCTION DATA  

  1. 1Features
  2. 2Applications
  3. 3Description
  4. 4Revision History
  5. 5Device Comparison
  6. 6Pin Configuration and Functions
  7. 7Specifications
    1. 7.1 Absolute Maximum Ratings (1) (1)
    2. 7.2 Recommended Operating Conditions
    3. 7.3 Dissipation Ratings
    4. 7.4 Electrical Characteristics
    5. 7.5 Timing Requirements
    6. 7.6 Switching Characteristics
    7. 7.7 Timing Diagram
    8. 7.8 Typical Characteristics
  8. 8Detailed Description
  9. 9Electrostatic Discharge Caution

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

7.1 Absolute Maximum Ratings (1)(2)

Over operating free-air temperature range (unless otherwise noted).
UNIT
Supply voltage, VDD6.5 V
All other pins–0.3 V to 6.5 V
Maximum low-output current, IOL5 mA
Maximum high-output current, IOH–5 mA
Input-clamp current, IIK (VI < 0 or VI > VDD)±20 mA
Output-clamp current, IOK (VO < 0 or VO > VDD)±20 mA
Continuous total power dissipationSee Dissipation Rating Table
Operating free-air temperature range, TA–40°C to 85°C
Storage temperature range, Tstg–65°C to 150°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to GND. For reliable operation, the device should not be operated at 6.5 V for more than t = 1000h continuously.