SLUSCC7C July 2016 – June 2018 TPS546C23
The TON_DELAY command sets the time in milliseconds, from when a start condition is received to when the output voltage starts to rise. The contents of this register can be stored to nonvolatile memory using the STORE_DEFAULT_ALL command.
For loop slave device, this command cannot be accessed. Any writes to this command will be ignored. An attempt to read or write this command will result in a NACK’d command, the reporting of an IVC fault, and triggering of SMB_ALERT.
The TON_DELAY command is formatted as a linear mode two’s complement binary integer.
|Format||Linear, two's complement binary|