SLVSD02D March 2015 – June 2019 TPS65982
Table 14 lists the summary of the source PD profiles that are supported for this specific design. PDO 1 and 2 will always be present in the system and will be able to be negotiated without any other system interaction. When DC barrel Jack voltage is sensed PDO 3 will become available for power delivery negotiation. The external sense resistor, RSENSE, is configured to only measure the current being sourced by the system. When operating as a sink of power the input current cannot be measured in this configuration.
|PDO||POD TYPE||VOLTAGE||CURRENT OR POWER||EXTERNALLY DEPENDENT|
|PDO1||Fixed Supply||5 V||3 A||No|
|PDO2||Battery Power||10 V - 13 V||30 W||No|
|PDO3||Fixed Supply||20 V||3 A||Yes|