SLVSF07 July   2021 TPS7H5001-SP

ADVANCE INFORMATION  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1  VIN and VLDO
      2. 7.3.2  Startup
      3. 7.3.3  Enable and Undervoltage Lockout (UVLO)
      4. 7.3.4  Voltage Reference
      5. 7.3.5  Error Amplifier
      6. 7.3.6  Output Voltage Programming
      7. 7.3.7  Soft-Start (SS)
      8. 7.3.8  Switching Frequency and External Synchronization
        1. 7.3.8.1 Internal Oscillator Mode
        2. 7.3.8.2 External Synchronization Mode
        3. 7.3.8.3 Primary-Secondary Mode
      9. 7.3.9  Primary Switching Outputs (OUTA and OUTB)
      10. 7.3.10 Synchronous Rectifier Outputs (SRA and SRB)
      11. 7.3.11 Dead Time and Leading Edge Blank Time Programmability (PS, SP, and LEB)
      12. 7.3.12 Pulse Skipping
      13. 7.3.13 Duty Cycle Programmability
      14. 7.3.14 Current Sense and PWM Generation (CS_ILIM)
      15. 7.3.15 Hiccup Mode Operation (HICC)
      16. 7.3.16 External Fault Protection (FAULT)
      17. 7.3.17 Slope Compensation (RSC)
      18. 7.3.18 Frequency Compensation
      19. 7.3.19 Thermal Shutdown
    4. 7.4 Device Functional Modes
  8. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1  Switching Frequency
        2. 8.2.2.2  Output Voltage Programming Resistors
        3. 8.2.2.3  Dead Time
        4. 8.2.2.4  Leading Edge Blank Time
        5. 8.2.2.5  Soft-Start Capacitor
        6. 8.2.2.6  Transformer
        7. 8.2.2.7  Main Switching FETs
        8. 8.2.2.8  Synchronous Rectificier FETs
        9. 8.2.2.9  RCD Clamp
        10. 8.2.2.10 Output Inductor
        11. 8.2.2.11 Output Capacitance and Filter
        12. 8.2.2.12 Sense Resistor
        13. 8.2.2.13 Hiccup Capacitor
        14. 8.2.2.14 Frequency Compensation Components
        15. 8.2.2.15 Slope Compensation Resistor
      3. 8.2.3 Application Curves
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Documentation Support
      1. 11.1.1 Related Documentation
    2. 11.2 Receiving Notification of Documentation Updates
    3. 11.3 Support Resources
    4. 11.4 Trademarks
    5. 11.5 Electrostatic Discharge Caution
    6. 11.6 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
  • HFT|22
Thermal pad, mechanical data (Package|Pins)
Orderable Information

Application Information

The TPS7H5001-SP is a radiation-hardness-assured dual output current mode PWM controller that can be utilized for designing space-grade DC-DC converters. The device should be paired with external gate drivers in order to provide control of the power semiconductor switching device(s) of the converter power stage. By allowing for switching frequencies up to 2 MHz and providing the capability to configure the leading edge blank time using a resistor, the controller provides many advantages for GaN power semiconductor based converter designs. The TPS7H5001-SP can be used for the design of a number of common DC-DC converter topologies, including but not limited to: buck, flyback, forward, active-clamp forward, push-pull, and full-bridge. The duty cycle limit of the device can be configured to be compatible with the selected topology using the DCL pin. With integrated synchronous rectification outputs for both of the main switching outputs, the controller enables the design of fully synchronous versions of each of the supported topologies. As such, the dead time can also be adjusted with an external resistor using the controller in order to optimize the overall converter efficiency.