SLUSEJ1 December 2021 TPSM8D6C24
|Write Transaction:||Write Word (writes accepted but otherwise ignored)|
|Read Transaction:||Read Word|
|Format:||Unsigned Binary (2 bytes)|
FUSION_ID0 provides a platform level Identification code to be used by Texas Instruments Digital Power Designer for identifying a TI device.
Writes to this command will be accepted, but ignored otherwise (the readback value of this command does not change following a write attempt). This command is writeable for some TI devices, so to maintain cross-compatibility, the TPSM8D6C24 accepts write transactions to this command as well. No STATUS_CML bits are set as a result of the receipt of a write attempt to this command.
|LEGEND: R/W = Read/Write; R = Read only|
|15:0||FUSION_ ID0||R||02D0h||Hard Coded to 02D0h|